| 338-OVAL | observ oval insert Lionel Limited | 1.75 |
| 380-7B | handrail stanchions brass | 0.35 |
| 380-7N | handrail stanchions nickel | 0.35 |
| 380-11B | brass whistle large 8,9,380,381,402 | 1.50 |
| 380-11L | brass whistle larger than 380-11B | 1.50 |
| 380-11N | nickle whistle large 8,9,380,381,40 | 1.50 |
| 380-22 | journal box & spring stan gauge rep | 1.00 |
| 381-48 | O/Std black spoked pilot/tr wheel | 6.00 |
| 381-93W | white repro flag w/small pole | 1.25 |
| 381-93G | green repro flag w/small pole | 1.25 |
| 381-93R | red repro flag w/small pole | 1.25 |
| 384-PTA | 384 pilot trk axle (.130) "O" wheel | 1.50 |
| 384-WS | stan gauge wheel set(4) red spoked | 30.00 |
| 384-F | loco frame MTH 384 repro LIMITED | 125.0 |
| 384-NB | brass number board repro | 1.50 |
| 384-TNP | brass tndr Lionel Lines plate repro | 1.50 |
| 384-PTF | pilot truck frame for 384 loco | 8.50 |
| 384-15R | repro boiler frnt uses 78-73 socket | 15.00 |
| 385-KB | brass LL Keystone repro 385,1835 et | 1.50 |
| 385-KN | nickle LL Keystone repro 385,1835 | 1.50 |
| 385-WS | stan gauge wheel set(4) black spoke | 27.60 |
| 385-F | loco frame MTH 385,1835 hard metal | 140.0 |
| 385E-CG | crosshead guide for 385,1835 | 3.00 |
| 385E-DSB | 3 pc brass dome/stack set MTH | 20.00 |
| 385E-DSN | 3 pc nickel dome/stack set MTH | 20.00 |
| 385E-NB | number board repro-fits boiler frnt | 1.00 |
| 385E-3 | copper/nickel smoke stack LIMITED | 8.00 |
| 385E-20 | main rod screw(8-32 thread) 385,183 | 1.00 |
| 385E-21 | main rod spacer 385,1835 | 0.50 |
| 385E-29 | boiler front latch reproduction | 2.75 |
| 385E-36C | copper headlite ring 385,1835 | 1.50 |
| 385E-36N | nickel headlite ring repro | 1.50 |
| 385E-37 | number plate frame 385,392,1835 | 2.00 |
| 385E-38 | plastic headlight lens repro | 1.00 |
| 385E-40 | stamped pilot 385,392,1835 | 9.50 |
| 385E-41F | trailing trk frame 392,385,1835 rep | 8.00 |
| 385E-49R | boilerfront casting reproduction | 12.50 |
| 385E-49M | boilerfront casting hard metal MTH | 20.00 |
| 385E-54 | 385,1835 steamchest MTH repro | 25.00 |
| 385T-BDY | tender body cast MTH repro | 75.00 |
| 385T-F | 385,1835 tender floor MTH repro | 19.50 |
| 385T-NP | Lionel Railway Lines nickle rep pr | 3.50 |
| 385T-BP | Lionel RR Lines brass adhes rep pr | 3.50 |
| 390-F | loco frame MTH 390 LIMITED | 120.0 |
| 390-PC | boiler pipe clamp nickle orig LIMIT | 0.50 |
| 390-31 | side rod (connecting) 384,390 | 2.50 |
| 390-32SRS | side rod screw (4-36) 260,384,390 | 0.90 |
| 390-34 | main rod shldr screw 260,384,390 | 0.60 |
| 390-35 | side rod spacer 260,384,390 | 0.60 |
| 390-51 | steamchest 384,390 reproduction | 25.00 |
| 390-59 | pilot trk frame 385,390,1835 | 7.50 |
| 390-62 | trailing trk frame only 390,#9 | 7.50 |
| 390-63 | valve gear 384,385,390,1835 | 3.00 |
| 390-65 | boiler front reproduction | 17.50 |
| 390-66N | nickel bell & bracket 390,400 MTH | 4.50 |
| 390-66B | brass bell & bracket 390,400 MTH | 4.50 |
| 390-68 | cowcatcher (pilot) 390,400E | 18.00 |
| 390-76W | white repro flag w/large pole | 1.50 |
| 390-76R | red reproduction flag w/large pole | 1.50 |
| 390-76G | green repro flag w/large pole | 1.50 |
| 390-80 | lantern stanchion for 390 platform | 3.00 |
| 390-86L | LH main rod & crosshd assy 384,390 | 7.50 |
| 390-86R | RH main rod & crosshd assy 384,390 | 7.50 |
| 392-WS | or 400E steam wheel set red spoke | 30.00 |
| 392-F | loco frame MTH repro LIMITED | 120.0 |
| 392E-NB | number board repro-fits boiler frnt | 1.25 |
| 392E-16 | steamchest reproduction | 25.00 |
| 392E-19 | boiler front casting repro | 20.00 |
| 392E-38F | lead trk frame 392E,400E repro | 15.00 |
| 392E-45N | turned nickle bell for 385,392 etc | 3.50 |
| 392T-LL | Lionel Lines tndr plate black/brass | 1.50 |
| 400E-HC | nickle handrail clip large | 0.50 |
| 400E-F | loco frame MTH 400E LIMITED | 160.0 |
| 400E-NBR | red/white number board repro | 1.25 |
| 400E-NBW | black/white number board repro | 1.25 |
| 400E-ATN | air tank-nickle MTH repro | 20.00 |
| 400E-ATB | air tank-brass MTH repro | 20.00 |
| 400E-5 | truck guide plate | 1.50 |
| 400E-6 | glass convex headlight lens orig | 4.00 |
| 400E-14 | crosshead guide 392,400 | 2.00 |
| 400E-15 | crosshead guide screw reproduction | 1.00 |
| 400E-16 | connecting rod 385,392,400E,1835 | 3.00 |
| 400E-20 | brass window frame reproduction | 1.25 |
| 400E-26C | copper headlite ring repro | 1.50 |
| 400E-26N | nickle headlite ring repro | 1.50 |
| 400E-27 | pilot/trail trk screw for 400E | 1.00 |
| 400E-29 | main rod screw 392,400E | 1.00 |
| 400E-30 | side rod screw(8-32) 385,392,400E | 0.90 |
| 400E-31 | main rod spacer 392,400E | 0.50 |
| 400E-36B | brass turned handrail stanch & nut | 1.75 |
| 400E-76 | steamchest MTH LIMITED | 25.00 |
| 400E-78 | main rod & crosshead assy | 7.50 |
| 400E-80 | valve gear 385,392,400E,1835 | 2.50 |
| 400E-91 | celluoid red (400E boiler front) | 0.50 |
| 400E-103 | spring for pilot or trailer truck | 0.50 |
| 400E-114 | brush tube reproduction | 1.50 |
| 400E-115 | brush tube screw reproduction | 1.50 |
| 400E-116 | brush spring coil type reproduction | 0.30 |
| 400E-118 | brush tube nut reproduction | 0.50 |
| 400E-122 | gear plate .112 hole orig new | 5.00 |
| 400E-122X | gear plate .125 hole orig new | 5.00 |
| 400E-125B | bushing for pilot/trailer truck | 3.50 |
| 400T-NP | LL tender plate nickel/black repro | 1.50 |
| 400T-BP | LL tender plate brass/black repro | 1.50 |
| 402-408 | coupler pilot rivet reproduction | 0.90 |
| 408-P | brass pantograph repro 408,381 | 15.00 |
| 418-21B | brass step for stan gauge pass car | 2.75 |
| 418-21N | nickel step for stan gauge pass car | 2.75 |
| 418-30 | air tank for passenger car MTH | 3.50 |
| 418-32E | airtank end only nickle repro | 1.50 |
| 418-36K | stan gauge knurled pass roof screw | 0.60 |
| 418-36S | stan gauge slotted pass roof screw | 0.90 |
| 418-46 | triangle coupler holder | 1.25 |
| 418-47 | coupler pin for triangle | 0.25 |
| 419-CA | trk collector assy repro (6 pc kit) | 7.50 |
| 436-13 | skylight 115,436 unpainted | 12.50 |
| 437-38B | brass knife switch male/female MTH | 6.50 |
| 437-38N | nickle knife switch male/female MTH | 6.50 |
| 451-303 | streetlight lamp #52,63 repro | 3.00 |
| 500-DHB | brass door handle fits 500 car door | 2.00 |
| 500-DHN | nickle door handle fits 500 door | 2.00 |
| 500-DG | doorguide-fits 500 series Stan Gaug | 3.75 |
| 511-LPB | log pocket brass reproduction | 1.75 |
| 511-LPN | log pocket nickel reproduction | 1.75 |
| 511-LSB | lumber stake brass | 1.75 |
| 511-LSN | lumber stake nickle | 1.75 |
| 511-WL | wood load for stan gauge flat repro | 6.00 |
| 511-NBS | nickle brakewheel stand stan gauge | 2.40 |
| 511-BBS | brass brakewheel stand stan gauge | 2.40 |
| 512-WB | 2 pc wine barrel stan gauge repro | 1.75 |
| 513-DOOR | cattle car door | 6.00 |
| 513-NPS | nickle adhesive plate set(4) repro | 5.00 |
| 514-BPS | brass adhesive plate set(4) repro | 5.00 |
| 514-RPS | Lionel Vent Refrig plate set repro | 8.50 |
| 514-NPS | nickle adhesive plate set(4) repro | 5.00 |
| 515-LDN | large nickle tank dome MTH repro | 5.50 |
| 515-SDN | small nickle tank dome MTH repro | 2.50 |
| 515-NPS | adhesive nickle plate set(4) | 5.00 |
| 515-BPS | brass adhesive plate set(4) | 5.00 |
| 515-4N | nickel tank car railing repro | 3.00 |
| 515-4B | brass tank car railing repro | 3.00 |
| 600-STEPB | brass pass car step 600 series | 2.50 |
| 600-STEPN | nickle pass car step 600 series | 2.50 |
| 600-4 | closed prewar truck retainer repr | 0.50 |
| 614-16 | End railing brass MTH repro LIMITED | 15.00 |
| 614-16L | red lens for 614-16L | 0.60 |
| 614-16LC | brass lens cap for 614-16 | 1.80 |
| 616-CA | insulator plate/brkt/roller assy | 3.75 |
| 616-CP | phenolic collectr plate laser repro | 3.00 |
| 616-FYP | 616 Flying Yankee adhes plate repro | 2.00 |
| 616-AP | 616 adhesive plate repro | 1.00 |
| 616-SSR | rivet to hold smokestack | 0.25 |
| 616-WB | wheel clearance bearing for 616 mtr | 1.00 |
| 616-LBS | light bracket & socket assy | 3.60 |
| 616-VU | vestibule rusty chrome orig used | 30.00 |
| 616-9 | short mtr pivot ball 616,636 repro | 4.75 |
| 616M-14 | collector plate assy orig new | 7.50 |
| 616T-17 | spring contact shoe for vestibules | 2.50 |
| 617-AP | 617 adhesive plate repro | 1.00 |
| 618-AP | 618 adhesive plate repro | 1.00 |
| 619-CPA | coupler pocket/stud assy repro | 9.50 |
| 619-AP | 619 adhesive plate repro | 1.00 |
| 620-2R | cast searchlite yoke reproduction | 6.00 |
| 620-4 | plastic searchlite lens for 620,820 | 0.75 |
| 620-5 | snap ring to fasten searchlite lens | 0.75 |
| 620-7 | handrail for searchlight car repro | 3.00 |
| 629-17 | slotted "O" gauge pass car roof scr | 0.60 |
| 636-LE | Lionel circle 7/16" engine nose rep | 2.00 |
| 636-VU | original used vestibule | 30.00 |
| 636-UP | UP overland engine plate repro | 2.00 |
| 636E-5B | engine grab rail brass 1.25" | 0.75 |
| 636E-5N | engine grab rail nickel 1.25" | 0.75 |
| 636W-AP | 636W adhesive number plate repro | 1.00 |
| 637-AP | 637 adhesive number plate repro | 1.00 |
| 637-CA | insulator plate/brkt/roller assy | 3.75 |
| 637-SR | short shoulder rivet for 637 pickup | 0.60 |
| 637-CB | collector bracket for 637/616 PU | 2.50 |
| 637-LR | long shoulder rivet-637 P/U assy | 0.60 |
| 638-AP | 638 adhesive number plate repro | 1.00 |
| 651-WLB | repo wood block w/grooves 651,2651 | 4.00 |
| 651-WLT | repro wood timbers set of 8 | 2.00 |
| 653-PSN | adhesive nickel plate set(4) repro | 4.50 |
| 653-PSB | adhesive brass plate set(4) repro | 4.50 |
| 654-D | water decal Sunoco diamond | 1.00 |
| 654-PSB | brass tankcar plate set(4) repro | 4.50 |
| 654-PSN | nickle tankcar plate set(4) repro | 4.50 |
| 654-SHELL | Shell tank car adhesive decal set | 2.50 |
| 654-SUN | Sunoco tank car adhesive decal set | 2.50 |
| 654-HRB | brass tankcar handrail preformed | 2.00 |
| 654-SUNX | tank car adhesive decal set | 2.50 |
| 655-DOOR | boxcar door w/knob hole 655,805 | 3.00 |
| 655-ROOF | roof for 655,2655 orig Madison | 10.00 |
| 655-PSB | brass plate set(4) LIMITED | 5.00 |
| 700E-SPT | scale pilot truck new Lionel LIMIT | 9.00 |
| 700T-4 | bearing cap reproduction | 1.00 |
| 700T-7 | black tndr ladder w/hole laser rep | 4.00 |
| 700T-8 | corner rail new LTI Limited | 0.50 |
| 700T-9 | grab handle LIMITED | 0.85 |
| 700T-12 | top tender rear handrail RH | 0.50 |
| 700T-13 | top tender rear handrail LH | 0.50 |
| 700T-22 | tender drawbar orig 700T tender | 2.00 |
| 700T-24 | coupler head new LTI | 3.00 |
| 700T-25 | hex head bearing cap screw | 0.35 |
| 700T-26 | coupler pivot screw | 1.25 |
| 700T-27 | tender grommet for 700T tender | 0.50 |
| 700T-30 | tender body orig Madison LIMITED | 100.0 |
| 701-12 | B6 geared cntr wheel assy LIMITED | 7.25 |
| 701-15 | B6 geared end wheel assy LIMITED | 7.25 |
| 701-16 | B6 plain center wheel assy LIMITED | 7.00 |
| 701-18 | B6 plain end wheel assy LIMITED | 7.00 |
| 711C-4 | o72 switch controller roller orig | 1.00 |
| 714-6 | boxcar short/end catwalk repro | 4.50 |
| 714-9 | scale box car door orig | 5.00 |
| 714-14 | door guide orig new | 1.00 |
| 714-17 | brown car end w/brakewheel orig | 10.00 |
| 714-24 | scale merchandise catwalk orig | 19.50 |
| 714T-3 | truck bolster orig new LIMITED | 5.00 |
| 714T-9A | scale car axle-reproduction | 1.00 |
| 715-AD | white SHELL adhesive decal set | 2.50 |
| 715-DSU | white SUNX water decal set repro | 5.00 |
| 715-DSH | white SHELL(8124) water decal set | 6.00 |
| 715-7 | cast metal tank dome new LTI | 2.00 |
| 715-100 | scale tank car handrail orig Madiso | 2.00 |
| 716-8 | hopper door LTI unpainted | 3.00 |
| 716-9 | door spring new LTI | 0.60 |
| 716-14 | airbrake original new Madison | 3.00 |
| 717-7 | body corner "L" rail orig Madison | 1.00 |
| 717-47 | lamp bracket assy reproduction | 4.00 |
| 717-60 | scale caboose ladder laser repro | 6.00 |
| 717T-3 | truck bolster orig new Madison | 6.00 |
| 721-NP | o72 switch nameplate orig | 2.50 |
| 752-9MP | long mtr pivot ball-752 loco repro | 4.75 |
| 752-15 | headlite lens 616,636,1688,1668,752 | 0.75 |
| 752-16N | 7/8" nickle handrail 616,637,752 | 0.75 |
| 752-34 | roof screw for 752,753 etc | 0.75 |
| 752-42 | vestbule connector clip w/screw | 2.50 |
| 752M-13 | compound gear for motor | 5.00 |
| 752M-17 | gear bushing sub 773-62 postwar | 1.25 |
| 752M-26 | brushplate reproduction LIMITED | 13.40 |
| 752M-27 | armature bearing plate orig LIMITED | 4.00 |
| 752M-31 | engine collector plate assy repro | 12.50 |
| 752M-36 | 11 tooth pinion gear reproductio | 2.50 |
| 752M-49R | axle .180 fits 752/616 loco wheels | 1.25 |
| 752M-50R | geared wheel reproduction | 4.50 |
| 752M-50 | geared loco wheel original | 6.00 |
| 752M-51R | non geared wheel repro | 1.75 |
| 752M-51 | plain loco wheel original new | 4.00 |
| 752M-53 | pinion for knurled shaft LIMITED | 1.50 |
| 752T-12 | vestibule car wheel reproduction | 2.75 |
| 752T-16 | vestibule spring slide shoe 753,754 | 2.50 |
| 752T-26 | vestibule kit unpainted repro | 45.00 |
| 753-F | reproduction coach frame MTH Limit | 60.00 |
| 754-F | repro observation frame MTH Limit | 55.00 |
| 754-TC | observation tail casting MTH LIMIT | 35.00 |
| 754-RT | observation rear truck MTH | 25.00 |
| 763E-NP | nameplate orig LIMITED | 5.00 |
| 763E-216 | eccentric rod assy RH LIMITED | 7.00 |
| 763E-217 | eccentric rod assy LH LIMITED | 7.00 |
| 771-CRJ | center rail joiner reproduction | 0.75 |
| 771-9 | solid T-rail fishplate repro | 0.50 |
| 771-10 | T-rail nut repro | 0.25 |
| 771-11 | T-rail bolt repro | 0.25 |
| 782-FC | combine front cap casting MTH Limit | 35.00 |
| 782-F | Hiawatha combine belly casting LIMI | 60.00 |
| 782-11 | window clamp for 752-16 | 1.00 |
| 800-CE | car frame end w/slot laser repro | 2.00 |
| 800-PB | brass Lionel Lines adhes plate repr | 1.25 |
| 800-PN | nickle Lionel Lines adhes plate rep | 1.25 |
| 800-NBC | nickle brakewheel cap reproduction | 1.00 |
| 800-2800B | brass "O" gauge brakewheel | 1.25 |
| 800-2800BS | brass boxcar brake shaft stanchion | 1.25 |
| 800-2800N | nickle "O" gauge brakewheel | 1.25 |
| 800-2800NS | nickel boxcar brake shaft stanchion | 1.25 |
| 800-2800BL | black "O" gauge brakewheel repro | 1.50 |
| 803-BPS | brass plate set(4) 803/Lionel repro | 4.00 |
| 803-NPS | nickel plate set(4) 803/Lionel repr | 4.00 |
| 804-AD | Shell tank car adhesive decal set | 2.50 |
| 804-AD2 | Sunoco tank car adhesive decal set | 2.50 |
| 804-BPS | brass plate set(4) 804/Lionel repro | 4.00 |
| 804-NPS | nickel plate set(4) 804/Lionel repr | 4.00 |
| 804-15N | nickle dome-tank car/263 tndr used | 1.50 |
| 805-DOOR | boxcar door (2 hole) repro 655,805 | 3.50 |
| 805-BPS | brass plate set(4) 805/Lionel repro | 4.00 |
| 805-NPS | nickle plate set(4) 805/Lionel repr | 4.00 |
| 806-DOOR | cattle car door w/1 hole 806 | 3.50 |
| 806-BDK | brass door knob for 806,418 repro | 0.75 |
| 806-NDK | nickle door knob for 806,418 repro | 0.75 |
| 806-BPS | brass plate set(4) 806/Lionel repro | 4.00 |
| 806-NPS | nickle plate set(4) 806/Lionel repr | 4.00 |
| 806-DOOR2 | cattle car door w/2 holes 806 repro | 3.50 |
| 810-IL | instruction label for crane boom | 1.50 |
| 810-6 | cab or boom elev gear reproduction | 3.75 |
| 810-36GR | repro worm gear elevates hook | 4.00 |
| 810-56 | track clamp & thumbscrew 810/2810 | 7.50 |
| 811-LSB | lumber stakes brass repro | 1.25 |
| 811-LSN | lumber stakes nickel repro | 1.25 |
| 811-NBS | nickle brakewheel stand | 1.50 |
| 811-WL | wooden load repro for 811,2811 | 5.00 |
| 812-WB | wine barrel "O" gauge reproduction | 1.50 |
| 812-BPS | brass plate set(4) 812/Lionel repro | 4.00 |
| 812-NPS | nickle plate set(4) 812/Lionel repr | 4.00 |
| 814-DHB | brass doorhandle for 814 boxcar | 1.50 |
| 814-DHN | nickle doorhandle for 814 boxcar | 1.50 |
| 814-D | boxcar door reproduction | 4.50 |
| 814-DS | reefer 4 door set+ all hardware | 10.00 |
| 814-4B | 6 rung brass ladder 814,260T,263T | 3.00 |
| 814-4N | 6 rung nickel ladder 814,260T,263T | 2.00 |
| 815-HRB | brass tankcar handrail preformed | 1.50 |
| 815-HRN | nickle tankcar handrail preformed | 1.50 |
| 815-LB | brass 4 rung tank car ladder | 2.00 |
| 815-LN | nickel 4 rung tank car ladder | 2.00 |
| 815-BPS | brass plate set(4) 815/Lionel repro | 4.00 |
| 815-NPS | nickle plate set(4) 815/Lionel repr | 4.00 |
| 816-BBW | brass brakewheel for hopper doors | 2.50 |
| 816-NBW | orig nickle handwheel only-no cap | 2.50 |
| 816-3B | brass 5 rung ladder | 3.50 |
| 816-3N | nickel 5 rung ladder | 3.50 |
| 820-SA | switch assy repro 820-2820 new MTH | 12.00 |
| 820-11N | nickel preform handrail 820/2820 | 1.75 |
| 1015-WS | wheel set repro Winner 1015/1035 | 25.00 |
| 1015-5CU | steam dome copper repro 259,Jr Loco | 4.50 |
| 1015-5N | steam dome nickel repro 259,Jr Loco | 4.50 |
| 1015-6N | nickle smoke stack 259E,winner | 6.00 |
| 1015-6CU | copper smoke stack 259E,winner | 6.00 |
| 1015-17 | nickel bell orig new for 259,Jr etc | 1.00 |
| 1029-24 | bushing original | 0.50 |
| 1041-29 | xformer handle orig new LIMITED | 2.50 |
| 1045-NP | nameplate orig used Madison | 1.50 |
| 1045-2 | half figure front original Madison | 4.00 |
| 1045-3 | half figure rear orig Madison | 4.00 |
| 1045-4 | arm assy with flag original LIMITED | 5.00 |
| 1100-WS | wheel set rep Mickey/1103/1105/1107 | 36.00 |
| 1100-WS2 | wheel set rep Winner 1100/1010/1030 | 25.00 |
| 1103-KEY | handcar key 1103,1105,1107 orig LIM | 7.00 |
| 1506-WS | wheel set rep 1506/1508/1511/1588 | 36.00 |
| 1550-8 | nickle eyelet for prewar trucks | 0.20 |
| 1661-WS | wheel set repro 1661/1681/1689 | 36.00 |
| 1661-NB | number board repro-fits boiler frnt | 1.25 |
| 1661-7 | solid trailer wheel reproduction | 1.25 |
| 1661-25 | cast headlite repro (259 b front) | 3.00 |
| 1661E-NB | number board repro-fits boiler frnt | 1.25 |
| 1662-CK | front coupler kit 10 pc repro | 30.00 |
| 1664E-WS | orig wheel set 1664,1684,1654 etc | 25.00 |
| 1664E-6 | short connecting rod for sheet met | 3.00 |
| 1664E-8 | thick side rod spacer | 0.60 |
| 1664E-9 | thin side rod spacer | 0.60 |
| 1664E-10A | RH main rod & cross hd assy repro | 3.50 |
| 1664E-11A | LH main rod & cross hd assy repro | 3.50 |
| 1664E-23 | RH eccentric valve gear assy | 6.50 |
| 1664E-24 | LH eccentric valve gear assy | 6.50 |
| 1666-NB | adhesive number plate reproduction | 1.25 |
| 1666E-22 | engine drawbar w/ears prewar 1666 | 2.10 |
| 1666E-37A | drawbar & bracket w/o step | 4.00 |
| 1666E-37B | drawbar & stepped bracket assy | 4.00 |
| 1668-NB | number/name plate orig new Madison | 2.50 |
| 1668E-5 | plain end wheel original LIMITED | 4.00 |
| 1668E-45 | valve gear assy (1668) reproduction | 6.00 |
| 1673-CPLR | 1673 (1st car) long tab hook cplr | 2.50 |
| 1679-DOOR | repro boxcar door | 3.00 |
| 1679-DGU | door guide for 1679 orig LIMITED | 1.50 |
| 1681-BF | red boiler front orig new LIMITED | 15.00 |
| 1681-NB | number board repro-fits boiler frnt | 1.25 |
| 1681E-DR | main rod-Lionel Jr. 1661,1681 etc | 1.25 |
| 1681E-6B | brush d=.125 fits 1681E-6 LIMITED | 0.75 |
| 1681E-6S | coil brush spring fits 1681E-6 plat | 0.25 |
| 1681E-19 | arm bearing 3 shldr ID=.125 LIMIT | 1.50 |
| 1681E-20 | armature pinion 12 tooth ID=.123 | 2.50 |
| 1681E-26 | collector shoe assy 1664,1688,1689 | 7.00 |
| 1684-26 | shoulder screw long | 0.60 |
| 1688-ML | red marker lens also 249E-1 | 1.00 |
| 1688-MS | 6-32x2" phillister mtr mount screw | 0.25 |
| 1688-NP | Lionel Lines plate 1688 repro | 2.00 |
| 1688-WS | wheel set repro 258,1688,1654 etc | 32.00 |
| 1688E-NP | adhesive namplate reproduction | 2.00 |
| 1688E-5 | pilot trk bracket & stud assy LIMIT | 5.00 |
| 1688E-7 | handrail 1668,1688 original | 1.25 |
| 1688E-32 | long single main rod | 1.00 |
| 1688E-39 | pilot truck 1668,1688,1689 repro | 6.00 |
| 1688T-3 | prewar coffin tender drawbar | 2.00 |
| 1689-BTNP | brass tndr adhes plate repro 1.5" | 1.25 |
| 1689-NTNP | nickle tndr adhes plate repro 1.5" | 1.25 |
| 1689E-NP | Lionel Lines adhes nameplate repro | 1.25 |
| 1689E-24 | rear truck 1668,1688,1689 repro | 5.00 |
| 1695-17 | roof spring Ives/Lionel pass car | 0.50 |
| 1700-WSE | wheel set repro for electric 1700 | 32.00 |
| 1700-WSW | wheel set repro for windup 1700 | 25.00 |
| 1766-STEPB | brass repro step fits 1766 or 1768 | 2.50 |
| 1766-STEPN | nickle repro step fits 1766 or 1768 | 2.50 |
| 1835-WS | stan gauge wheel set(4) black spoke | 27.60 |
| 1835E-NB | number board repro-fits boiler frnt | 1.00 |
| 1835T-2 | nickle frnt side tndr handrail orig | 0.50 |
| 2203-B6 | drawbar for cast prewar B6 tndr | 1.50 |
| 2652-AD | white lettering set for orange gon | 3.50 |
| 2652-NBLL | #board & Lionel Lines plate set(4) | 4.50 |
| 2654-ADS | Shell tank car adhesive decal set | 2.50 |
| 2654-BPS | brass tank car adhes plate set(4) | 4.00 |
| 2654-NPS | nickle tank car adhes plate set(4) | 4.00 |
| 2656-NPS | nickle stock car adhes plate set(4) | 4.00 |
| 2656-BPS | brass stock car adhes plate set(4) | 4.00 |
| 2660-12 | crane boom elevating wing nut | 1.75 |
| 2660-13 | pulley for prewar boom- repro | 1.50 |
| 2660-20 | red crane roof original | 5.00 |
| 2689W-TPU | tndr pickup insul & roller assy | 3.50 |
| 2810-HW | dishtype handwheel repro | 2.50 |
| 2815-AD | adhesive decal Shell RED *pair* | 1.75 |
| 2955-ADB | Sunoco adhesive decal set black | 2.50 |
| 2955-ADW | Sunoco adhesive decal set white | 2.50 |
| 2955-DW | white SUNX water decal set repro | 5.00 |
| 2955-DB | black SUNX water decal set repro | 5.00 |
| 2955-SDW | white SHELL water decal set repro | 6.00 |
| 3651-21 | log stakes prewar "O"(nickel) | 0.75 |
| 3651-21B | log stakes prewar "O"(black) | 0.75 |
| 3652-25 | plunger spring reproduction | 0.75 |
| 3652-38 | small oval wooden barrel repro | 0.50 |
| 3659-6 | solenoid bakelite cover orig LIMIT | 4.50 |
| 3659-7 | pinion gear original Madison | 2.00 |
| 3659-12 | plunger assy original LIMITED | 2.50 |
| 3659-19 | gear segment original Madison | 3.00 |
| 3659-20 | dump car latch orig LIMITED | 1.00 |