| 3357-18 | hobo figure assy painted | 6.00 |
| 3357-20 | blue cop figure assy painted LIMIT | 6.00 |
| 3357-22 | cop/hobo car pltfrm assy LIMIT | 7.50 |
| 3359-5 | handrail assy RH original LIMITED | 5.00 |
| 3359-7 | gear & lever orig new LIMITED | 1.50 |
| 3359-8 | pivot pin orig new LIMITED | 0.75 |
| 3359-9 | handrail assy LH original LIMITED | 5.00 |
| 3359-11 | coil & cover assy orig used | 5.00 |
| 3359-12 | rivet use 530-40 | 0.20 |
| 3359-21 | pinion arm RH reproduction | 2.50 |
| 3359-22 | pinion arm LH reproduction | 2.50 |
| 3359-25 | center pin original new LIMITED | 0.50 |
| 3359-31 | solder lug substitute 45-58 | 0.25 |
| 3359-33 | cam lock original new | 1.00 |
| 3360-9B | black burro crane boom new Lionel | 4.00 |
| 3360-9P | painted yellow burro crane boom | 7.50 |
| 3360-13 | rivet .087 x .343 | 0.20 |
| 3360-18 | handwheel assy burro crane LIMITED | 2.50 |
| 3360-21 | boom elevating nut | 1.00 |
| 3360-22 | guy wire | 0.75 |
| 3360-23 | collector insulator | 1.00 |
| 3360-25 | idler gear | 0.75 |
| 3360-27 | spring safety clutch | 0.25 |
| 3360-28 | main gear shaft | 0.75 |
| 3360-29 | cab drive worm | 1.00 |
| 3360-30 | worm wheel new Lionel | 1.00 |
| 3360-31 | gear | 0.50 |
| 3360-32 | safety clutch worm gear LIM | 1.00 |
| 3360-34 | engaging lever | 1.25 |
| 3360-42 | internal ring gear | 2.00 |
| 3360-48 | pinion & shaft assy LIMIT | 1.50 |
| 3360-49 | pinion gear LIMITED | 0.60 |
| 3360-57 | lever on/off black oxide | 0.75 |
| 3360-58 | spring washer | 0.40 |
| 3360-59 | rivet shouldered | 0.50 |
| 3360-62 | switch spring | 1.00 |
| 3360-63 | slider black oxide | 1.25 |
| 3360-64 | switch spring link | 1.50 |
| 3360-65 | shouldered rivet | 0.50 |
| 3360-70 | switch plate | 0.75 |
| 3360-72 | contact rivet | 0.50 |
| 3360-73 | switch arm nickle plated | 0.75 |
| 3360-74 | shouldered rivet nickle plated | 0.30 |
| 3360-86 | wheel & axle w/gear LIMIT | 3.00 |
| 3360-93 | collector assy LIMITED | 12.00 |
| 3360-95 | shift lever black oxide | 1.50 |
| 3360-96 | truearc ring LIMITED | 0.50 |
| 3360-97 | shift lever washer | 0.25 |
| 3360-125 | actuator for burro crane repro | 7.50 |
| 3360-131 | spring washer 54-126 actuator | 0.35 |
| 3360-137 | roller burro crane | 1.00 |
| 3361-5 | grey log dump frame reproduction | 2.50 |
| 3361-7 | dump frame lock | 1.50 |
| 3361-21 | log for 464,3361 or 9300 MPC | 0.40 |
| 3361-32 | insulated rivet reproduction | 0.60 |
| 3362-10 | trigger pin new LTI LIMITED | 1.50 |
| 3362-12 | finger tip for dump frame | 1.00 |
| 3362-14 | helium tank repro silver | 1.50 |
| 3362-16P | dump frame painted green | 3.00 |
| 3362-16 | dump frame molded green repro | 4.00 |
| 3362-21 | trigger spring | 0.35 |
| 3362-22 | dump frame spring | 0.25 |
| 3362-23 | frame lock spring | 1.50 |
| 3370-WS | wheel set with cam orig new LIMITED | 2.50 |
| 3370-5 | frame cop&hobo car new LTI LIMITED | 2.50 |
| 3370-7 | pivot pin repro | 1.00 |
| 3370-8 | ratchet for sheriff & outlaw LIMIT | 1.50 |
| 3370-9 | drag spring | 0.50 |
| 3370-10 | actuator lever | 1.25 |
| 3370-11 | eyelet | 0.25 |
| 3370-12 | pawl for sheriff & outlaw car | 1.00 |
| 3376-14 | giraffe all yellow LIMIT | 3.00 |
| 3376-16 | tension spring | 1.00 |
| 3376-17 | giraffe pin | 1.00 |
| 3376-18 | counter weight | 0.50 |
| 3376-20L | frame for giraffe car new Lionel | 3.25 |
| 3376-21 | yellow cam follower (uses 101-89) | 1.75 |
| 3376-105 | cam plate assy reproduction | 9.00 |
| 3376-111 | cam spring for giraffe trip | 1.25 |
| 3413-RB | rocket body only reproduction | 9.50 |
| 3413-RP | rocket & parachute complete repro | 20.00 |
| 3413-CS | capsule & chute reproduction | 8.00 |
| 3413-23 | rocket base (red) reproduction | 3.50 |
| 3419-SPDB | spring under double blades | 1.00 |
| 3419-4 | trigger mechanism original LIMITED | 5.00 |
| 3419-6 | helicopter nose clear | 1.75 |
| 3419-7 | helicopter skid repro | 4.00 |
| 3419-11 | clutch | 2.00 |
| 3419-17 | armature spring | 0.35 |
| 3419-23L | large winding spool repro | 4.00 |
| 3419-26 | main spring reproduction | 1.50 |
| 3419-27 | cup washer original LIMITED | 1.25 |
| 3419-31 | tail rest reproduction | 2.50 |
| 3419-44 | translucent yellow copter tail repr | 3.00 |
| 3419-44SY | solid yellow copter tail reproducti | 3.00 |
| 3419-44W | white helicopter tail reproduction | 3.00 |
| 3419-44R | red helicopter tail reproduction | 2.00 |
| 3419-45 | clip holds skid to copter | 0.30 |
| 3419-48LB | lower copter double blade | 3.50 |
| 3419-48S | short single copter blade | 3.00 |
| 3419-48UB | upper copter double blade | 3.50 |
| 3419-100N | NAVY helicopter reproduction | 15.00 |
| 3419-102 | short square shaft for SB copter | 1.50 |
| 3424-10 | brakeman car frame new LTI LIMITED | 4.00 |
| 3424-18G | figure support new Lionel | 1.50 |
| 3424-19 | figure support rivet LIMITED | 1.00 |
| 3424-33RB | blue brakeman exc reproduction | 2.50 |
| 3424-33RW | white brakeman exc reproduction | 2.50 |
| 3424-77B | telltale pole black Lionel | 1.50 |
| 3424-77P | tell tale pole LTI painted orange | 2.00 |
| 3424-78 | tell tale new Lionel | 0.25 |
| 3424-78R | tell tale reproduction | 0.35 |
| 3424-79 | tell tale rod original type | 1.60 |
| 3424-80 | baseplate assy reproduction | 7.50 |
| 3424-84 | spring for 3424-80 base assy | 0.50 |
| 3424-85 | O27 actuator blade reproduction | 2.50 |
| 3424-86 | O actuator blade reproduction | 2.50 |
| 3428-12 | mailman figure with no magnet | 2.00 |
| 3428-12MB | blue mailman figure w/magnet repro | 3.50 |
| 3428-12MG | grey mailman figure w/magnet repro | 3.50 |
| 3428-17B | blue mail bag w/stud reproduction | 1.25 |
| 3428-17G | grey mailbag with stud | 1.25 |
| 3429-100 | USMC helicopter reproduction | 15.00 |
| 3434-4 | bracket assy new LTI LIMITED | 2.50 |
| 3434-6 | flat spring new Lionel LIMITED | 0.75 |
| 3434-8 | swing lever new LTI LIMITED | 1.00 |
| 3434-10 | chicken sweeper man orig LIMIT | 3.00 |
| 3435-7 | aquarium car vibrator mtr assy | 12.50 |
| 3435-10 | aquarium car screen LIMITED | 2.50 |
| 3435-14 | aquarium car spool new Lionel | 1.50 |
| 3444-10 | pulley spool new Lionel LIMIT | 0.75 |
| 3444-12 | pulley pivot orig LIMITED | 1.75 |
| 3444-13 | pilot spring LIMIT | 0.75 |
| 3444-20 | drive line spring | 1.00 |
| 3444-22 | conveyor belt assy LIMITED | 6.50 |
| 3444-25 | E-ring | 0.25 |
| 3444-31 | figure hobo | 2.00 |
| 3444-32 | cop figure reproduction | 2.00 |
| 3451-4 | brakestand hard metal repro | 2.00 |
| 3451-5 | brakestand assy w/brakewheel | 2.60 |
| 3451-12 | coil cover original | 2.00 |
| 3451-18 | cam laser reproduction | 2.00 |
| 3451-19 | cam rivet substitute | 0.20 |
| 3451-21 | clamp-original Madison LIMITED | 1.00 |
| 3451-31 | contact strip reproduction (WSR-43) | 2.00 |
| 3451-32 | coil assy (log dump) orig used | 3.00 |
| 3454-CBR | brown baby ruth cube repro | 1.50 |
| 3454-CRED | red baby ruth cube repro | 1.50 |
| 3454-CUBE | brown merchandise cube repro | 0.75 |
| 3454-35 | roof door hinge pin - orig Madison | 0.75 |
| 3454-40 | silver roof hatch orig LIMITED | 4.00 |
| 3456-13 | door hinge pin | 0.25 |
| 3456-15 | mounting plate assy LIMIT | 6.00 |
| 3456-23 | plunger spring | 0.90 |
| 3456-25 | screw | 0.20 |
| 3459-FR | frame 3459/3469 orig used LIM | 5.00 |
| 3459-7 | coil cover original Madison | 1.00 |
| 3459-8 | handrail reproduction | 2.75 |
| 3459-9 | bracket laser repro | 1.75 |
| 3459-16 | plain arm with hole reproduction | 0.50 |
| 3459-16X | plain arm w/pin hard metal | 0.50 |
| 3459-17 | pinion arm with gear reproduction | 2.00 |
| 3459-19 | gear reproduction | 2.50 |
| 3459-20 | pivot screw reproduction | 1.00 |
| 3459-27 | frame cover laser repro | 3.00 |
| 3459-33 | black lockwasher #4 split ring | 0.20 |
| 3459-37 | groove pin reproduction | 0.60 |
| 3459-42 | lockwasher split ring #8 black ox | 0.20 |
| 3460-F | fruehauf dura van adhesives(2) repr | 1.75 |
| 3460-VP | plate set Lionel Fruehauf repro | 4.80 |
| 3461-LOG | stained log 164,3461,364 etc | 0.40 |
| 3462-P1 | platform complete reproduction | 25.00 |
| 3462-P14 | milk car platform tin shelf | 2.75 |
| 3462-P8 | platform step reproduction | 2.00 |
| 3462-PS | white platform structure only | 7.50 |
| 3462-P13 | handrail for milk platform LIMITED | 2.50 |
| 3462-3 | metal door & frame assy kit repr | 4.50 |
| 3462-4 | swinging door metal reproduction | 1.25 |
| 3462-7 | cast roof door orig used | 1.50 |
| 3462-15 | door hinge pin | 0.30 |
| 3462-16 | spring RH for metal door | 0.40 |
| 3462-17 | spring LH for metal door | 0.40 |
| 3462-27 | frame spring reproduction | 1.00 |
| 3462-40 | milk car figure reproduction | 2.00 |
| 3462-51 | plunger assy straight pin repro | 3.75 |
| 3462-70 | magnetic milk can - reproduction | 1.00 |
| 3462-70M | square magnet 1/8 x1/8 x 1/4 | 0.50 |
| 3462-84 | mechanism spring reproduction | 0.50 |
| 3462-87 | plunger rod assy w/bend repro | 3.75 |
| 3464-7 | trigger spring | 0.25 |
| 3464-8 | or 3464-6 cam lever new LTI | 1.50 |
| 3464-9 | lever spring | 1.00 |
| 3464-10 | shouldered rivet | 0.60 |
| 3464-12 | trigger pin | 1.25 |
| 3464-13 | figure lever new Lionel | 1.00 |
| 3464-14 | trigger armature reproduction | 1.00 |
| 3464-16 | or -19 tubular rivet | 0.20 |
| 3464-17 | blue figure one arm down repro | 2.00 |
| 3464-17A | blue figure open arms repro | 2.00 |
| 3464-42 | box car door (black plastic) | 1.25 |
| 3464-43 | trigger housing smaller OD | 1.00 |
| 3464-43X | trigger housing larger OD | 1.25 |
| 3469-18 | bearing plate rivet substitute | 0.20 |
| 3470-BODY | target launcher body orig used LIMI | 9.00 |
| 3470-3 | red switch reproduction | 3.50 |
| 3470-4 | basket target launchr repro | 5.00 |
| 3470-11 | motor & blower assy original | 7.50 |
| 3470-12 | target balloon reproduction | 1.00 |
| 3472-21 | conical spring reproduction | 0.50 |
| 3472-27 | plunger spring washer | 0.30 |
| 3472-28 | shim washer | 0.25 |
| 3472-36 | figure milkman reproduction | 2.50 |
| 3472-43 | door LH eggshell orig LIMITED | 1.50 |
| 3472-44 | eggshell door frame original | 0.50 |
| 3472-45 | milk car door spring | 0.20 |
| 3472-46 | eggshell color door kit repro | 3.00 |
| 3472-46A | eggshell milkcar door set ASSEMBLED | 5.00 |
| 3472-60 | white color door kit reproduction | 3.00 |
| 3472-60A | white milk car door set ASSEMBLED | 5.00 |
| 3482-14 | milk car coil original new LIMITED | 4.00 |
| 3482-33 | milk car door spring | 0.25 |
| 3484-3 | frame & mechanism assy new LTI | 9.00 |
| 3484-4 | operating boxcar frame new | 3.50 |
| 3484-8 | or 3464-6 cam lever | 1.50 |
| 3509-SATT | sattelite assy also 333-100 | 10.00 |
| 3512-26 | drive belt for fire/TV car | 0.50 |
| 3512-27 | wheels & axle assy LIMITED | 2.00 |
| 3512-30 | return arm gear LIMITED | 0.50 |
| 3512-34 | figure gear new LTI LIMIT | 0.50 |
| 3512-39 | turret-painted red LIMITED | 3.50 |
| 3512-43 | lower extension ladder only | 5.00 |
| 3512-44 | extension pulley | 1.00 |
| 3512-47 | extension ladder only LIMITED | 5.00 |
| 3512-47&68 | extension ladders reproduction | 9.50 |
| 3512-48 | ladder line spring only LIMITED | 0.50 |
| 3512-49 | ladder line assy new LTI LIMITED | 2.25 |
| 3512-55 | windless drum original new | 1.00 |
| 3512-56 | gear new LTI LIMITED | 0.75 |
| 3512-58 | lamp shade (shroud) repro | 1.50 |
| 3512-59 | lens for firecar | 2.50 |
| 3512-63 | click pawl new LTI LIMITED | 0.50 |
| 3512-64 | spring | 0.50 |
| 3512-66 | turret spring new LTI LIMITED | 0.25 |
| 3519-ANT | antenna dish yellow for 3505/3519 | 1.75 |
| 3520-7 | searchlite bracket reproduction | 6.00 |
| 3520-9 | searchlight bracket reproduction | 1.50 |
| 3520-11 | grey searchlite & reflector repro | 3.75 |
| 3520-11X | orange searchight head reproduction | 2.50 |
| 3520-12 | black searchlight housing only | 2.50 |
| 3520-13 | searchlight reflector | 1.00 |
| 3520-16 | driving washer 6 fingered | 1.00 |
| 3520-39 | cloth wire & washer assy orig new | 0.75 |
| 3520-42 | adhesive washer (degrease b4 using) | 0.60 |
| 3520-52 | searchlite housing (grey) repro | 2.50 |
| 3530-6 | door guide gen/fire car repro | 0.75 |
| 3530-9 | LH door (Z) reproduction | 6.50 |
| 3530-27 | fuel tank MPC red | 1.75 |
| 3530-30 | service transformer new LIONEL | 2.00 |
| 3530-31 | connecting tube new Lionel | 1.00 |
| 3530-35 | lug (car to searchlite) crimp on | 0.95 |
| 3530-47 | spring contact for RH door repro | 2.00 |
| 3530-48 | driving washer 6 fingered | 1.00 |
| 3535-9 | gun and bracket reproduction | 10.00 |
| 3540-RS | green radar scope reproduction | 2.50 |
| 3540-29 | retaining ring | 0.20 |
| 3545-10 | reflector stand painted yellow | 2.50 |
| 3545-12 | reflector box painted silver | 2.50 |
| 3545-13 | counterweight reproduction | 1.50 |
| 3545-14 | TV screen reproduction | 2.50 |
| 3562-8 | barrel car man bracket | 2.00 |
| 3562-15 | frame, barrel car LIMIT | 4.50 |
| 3562-18 | pole piece LIMITED | 4.00 |
| 3562-22 | coil assy for barrel car LIMITED | 6.00 |
| 3562-48 | barrel ramp extension | 3.50 |
| 3562-49 | screw-for coil housing | 0.20 |
| 3562-62 | figure both arms open repro | 2.00 |
| 3562-62R | blue figure T-slot w/arm down repro | 2.00 |
| 3619-H | HO helicopter red reproduction | 10.00 |
| 3619-12 | shaft & spacer orig new LIMITED | 1.00 |
| 3619-23 | spacer orig new LIMITED | 0.50 |
| 3650-5 | spring | 0.30 |
| 3650-11 | magnet plate for searchlite car | 0.50 |
| 3650-14 | spool support orig new LIMITED | 3.50 |
| 3650-18 | 6 ft green 2-con searchlite wire | 1.50 |
| 3650-19 | magnet retainer for 3650 base | 0.50 |
| 3650-22 | searchlite car crank LTI hard metal | 3.50 |
| 3650-22R | crank searchlite car repro | 2.50 |
| 3650-24 | magnet for housing base | 2.00 |
| 3650-30 | base & lamp socket assy repro | 19.50 |
| 3650-31 | eyelet SE-712 | 0.30 |
| 3651-14 | plunger assy orig new fits 164,3651 | 1.50 |
| 3656-CO | cattle original LIMITED | 2.50 |
| 3656-CR | cattle black reproduction | 1.50 |
| 3656-PY | yellow paint enamel 1/2 pt AKA#58 | 8.00 |
| 3656-CWR | cattle white reproduction | 1.50 |
| 3656-5 | sliding door assy orig LIMITED | 4.00 |
| 3656-11 | Armour adhes decals*pair* repro | 1.75 |
| 3656-12 | groove pin orig new LIMITED | 0.40 |
| 3656-13U | front piece orig used LIMITED | 1.50 |
| 3656-15 | runway orig used-LIMITED | 2.50 |
| 3656-16 | grommet original new | 0.75 |
| 3656-17 | adhesive vibration car washer gray | 0.25 |
| 3656-18 | coil bracket original LIMITED | 1.50 |
| 3656-21 | spring pivot pin | 0.75 |
| 3656-22 | spring original LIMITED | 0.50 |
| 3656-33 | gate spring rivet | 0.20 |
| 3656-59 | rivet | 0.30 |
| 3656-64 | contact strip original new | 0.50 |
| 3656-66 | "O" gauge GROUND clip repro | 2.00 |
| 3656-67 | "O" gauge power blade repro | 1.00 |
| 3656-68 | O27 gauge power blade repro | 1.00 |
| 3656-68S | super O power blade laser repro | 2.00 |
| 3656-71 | platform grommet orig LIMITED | 1.50 |
| 3656-72Y | &79 corral gates YELLOW repro | 2.50 |
| 3656-72 | &79 corral gates ORANGE repro | 2.50 |
| 3656-73 | gate spring LH reproduction | 1.25 |
| 3656-77 | gate spring RH reproduction | 1.25 |
| 3656-85 | plunger LIMITED | 0.75 |
| 3656-90AD | adhesive nameplate reproduction | 2.50 |
| 3656-97 | chain early cattle pen orig new | 2.50 |
| 3656-106 | counterweight & plate orig LIMIT | 2.50 |
| 3656-113 | spade bolt orig new | 1.00 |
| 3656-114 | hinge spring original | 0.75 |
| 3656-129 | corral ramp laser cut painted | 10.00 |
| 3656-132 | adjusting nut freight station | 0.60 |
| 3656-141 | spacer tube reproduction | 1.50 |
| 3656-142 | coil bracket assy orig Madison LIMI | 2.50 |
| 3656-146 | plunger assy original new Madison | 3.00 |
| 3656-153 | doorguide drive stud binding head | 0.20 |
| 3656-156 | power casing late orig new LIMITED | 2.50 |
| 3656-157 | contact insulation orig LIMITED | 1.50 |
| 3656-169 | black adhesive vibration washer | 0.25 |
| 3656-170 | armature plate assy orig used LIMIT | 4.00 |
| 3656-177S | center stud only for platform | 1.50 |
| 3656-180 | bridge original Madison | 5.00 |
| 3656-185 | coil- orig used LIMITED | 3.00 |
| 3656-207 | spring | 0.35 |
| 3659-9 | square shaft original LIMITED | 2.00 |
| 3662-SR | chute rivet used with spring | 0.25 |
| 3662-10 | door RH molded brown reproduction | 1.50 |
| 3662-14 | door LH molded brown reproduction | 1.50 |
| 3662-18 | door retainer | 0.50 |
| 3662-19 | door spring for long milk car | 0.50 |
| 3662-31 | roof hatch brown MPC | 2.00 |
| 3662-32 | milk car frame only orig Madison | 4.00 |
| 3662-36 | retaining washer for milk car | 0.25 |
| 3662-37 | sweep arm spring | 0.75 |
| 3662-38 | trimount push stud | 0.40 |
| 3662-49 | conical spring long milk car | 1.25 |
| 3662-54 | chute assy LIMITED | 3.00 |
| 3662-59 | chute cover | 1.00 |
| 3662-60 | repro milk can for 3662 milk car | 1.50 |
| 3662-69 | plunger assembly LIMITED | 2.50 |
| 3664-303 | miniature switch LIMITED | 0.75 |
| 3665-2 | eyelet for 3665 launcher (SE-46) | 0.20 |
| 3665-5 | trigger wire-reproduction | 1.00 |
| 3665-6 | elevating bar LIMITED | 1.60 |
| 3665-8 | housing- molded black LIMITED | 1.00 |
| 3672-AD | Bosco adhesive decals *pair* | 2.50 |
| 3672-CAN | bosco milk can reproduction | 2.50 |
| 3672-50 | Bosco platform complete repro | 25.00 |
| 3830-106 | periscope/induct tube reproduction | 1.00 |
| 3830-107 | drive hook new Lionel | 0.75 |
| 3830-109 | submarine nose cone assy repro | 7.00 |
| 3830-111 | submarine conning tower repro | 3.50 |
| 3830-116 | submarine rudder repro | 3.75 |
| 3830-117 | sub diving elevator repro LIMITED | 3.75 |
| 3830-118 | bottom window clear label LIONEL | 3.00 |
| 3830-119 | bow ring new original | 0.40 |
| 3830-121 | rudder "O" ring for submarine | 0.50 |
| 3830-122 | shaft for submarine | 0.90 |
| 3830-123 | flotation segment new Lionel | 0.20 |
| 3830-126P | sub propeller new Lionel LIMITED | 1.50 |
| 3830-130 | brass thrust washer | 0.20 |
| 3830-131 | rubber drive band for submarine | 0.25 |
| 3854-HATCH | metal hatch merchandise car orig | 1.50 |
| 3854-TRK | double shoe truck orig Madison LIMI | 12.50 |
| 3854-TB | truck beam - orig one pc | 4.00 |
| 3854-5 | catwalk clip original Madison | 0.75 |
| 3854-8 | side clamp screw original | 0.50 |
| 3927-11 | armature original LIMITED | 20.00 |
| 3927-14 | ball bearing LIMITED | 0.50 |
| 3927-16 | driving arbor reproduction | 4.50 |
| 3927-20 | first cluster gear orig LIMITED | 4.00 |
| 3927-21 | second cluster gear orig LIMITED | 4.00 |
| 3927-25 | track cleaning car sponge | 0.50 |
| 3927-25A | track cleaning adhesive sponge | 1.25 |
| 3927-29 | swivel bracket reproduction | 2.75 |
| 3927-32 | wiper carriage assy reproduction | 7.50 |
| 3927-36 | toggle spring reproduction | 0.60 |
| 3927-38 | solid repro bottle w/lettering | 4.00 |
| 3927-38AD | adhesive decals(2) for bottles | 1.75 |
| 3927-47 | sponge plate only | 1.50 |
| 3927-50 | track cleaning wiper | 0.25 |
| 3927-55 | collector assy new Lionel | 3.75 |