| 1033-20 | binding post original | 1.00 |
| 1033-20R | binding post repro easy to install | 0.60 |
| 1033-25 | adhesive nameplate reproduction | 3.50 |
| 1033-26 | bearing plate assy original | 17.50 |
| 1033-34 | contact screw for rectangular brkr | 0.50 |
| 1033-40 | volt control shaft original | 3.50 |
| 1033-41 | contact arm original new | 2.00 |
| 1033-42 | switch shaft assy w/contact repro | 7.00 |
| 1033-43R | switch shaft only reproduction | 5.00 |
| 1033-44 | contact wiper only for 1033-42 | 3.00 |
| 1033-47 | binding post nut1033 (NEW) | 0.50 |
| 1033-54 | red fiberglass sleeve 4" | 0.50 |
| 1033-62 | cover screw 1033,LW,1034 etc | 0.25 |
| 1033-62M | cover screw MPC torque head | 0.25 |
| 1033-86 | rectifier speed nut | 0.35 |
| 1033-98 | centering spring reproduction | 1.25 |
| 1033-101 | drive stud reproduction | 0.25 |
| 1033-108 | retaining sleeve reproduction | 1.00 |
| 1034-10 | 1034 adhesive transformer decal | 3.00 |
| 1034-13 | contact spring original new | 1.00 |
| 1034-17 | circuit breaker (late) orig new | 5.00 |
| 1041-13 | rectifier disc selen ox repro | 5.00 |
| 1041-13W | polarity reversal washer | 0.60 |
| 1041-33 | solder lug (FM bracket) | 0.20 |
| 1044-ANP | adhesive nameplate for 1044 | 3.50 |
| 1044-16 | solder lug original | 0.35 |
| 1044-24 | control shaft reproduction | 3.75 |
| 1044-28 | whistle control shaft reproduction | 5.00 |
| 1044-31 | control handle red LIMITED | 6.00 |
| 1044-32 | concave disc -fits 1044 handle | 1.00 |
| 1044-60 | black eyelet LIMITED | 0.25 |
| 1044-61 | whistle switch shaft assy repro | 7.50 |
| 1047-7 | flag for operating switchman | 0.40 |
| 1050-5 | drawbar original LIMITED | 1.50 |
| 1050-8 | side rod with split - reproduction | 2.00 |
| 1050-114 | drum housing cover orig used | 1.00 |
| 1050-115 | geared wheel & axle orig new | 2.50 |
| 1050-204 | brush cover for 1050,1060 etc | 2.00 |
| 1053-37 | circuit breaker 60 watts orig LIMIT | 5.00 |
| 1055-48 | wheel & axle assy orig used LIMITED | 2.00 |
| 1055-51 | axle plain | 0.75 |
| 1055-52 | top plate only for Alco truck | 1.25 |
| 1055-56 | motor mounting spring | 0.20 |
| 1061-4 | front truck bracket new LTI LIMITED | 1.00 |
| 1063-39 | plastic stud original new | 1.00 |
| 1063-41 | brass washer LIMITED | 0.50 |
| 1110-7 | front truck bracket only | 2.50 |
| 1110-8 | side rod old style reproduction | 1.50 |
| 1110-8MPC | embossed side rod MPC | 0.50 |
| 1110-9 | rear truck bracket laser repro | 1.50 |
| 1110-51 | gear wheel & axle assy | 4.00 |
| 1110-53 | plain wheel | 1.00 |
| 1120-6 | rear truck assy orig used | 4.00 |
| 1120-7 | front truck orig used | 2.00 |
| 1120-7A | front trk/bracket assy orig used | 5.00 |
| 1120-9 | front truck bracket orig used | 1.00 |
| 1120-9U | truck bracket orig used | 2.00 |
| 1120-10 | rivet for front truck | 0.20 |
| 1120-11 | front truck spring | 0.30 |
| 1120-13 | motor mount pin repro for cast cab | 2.00 |
| 1120-120 | motor ground strip | 0.50 |
| 1121-5 | swivel rail RH orig | 1.00 |
| 1121-6 | swivel rail LH orig | 1.00 |
| 1121-10 | shutter original LIMITED | 1.00 |
| 1121-13 | frog rivet original new | 0.50 |
| 1121-15 | lock hinge original | 0.50 |
| 1121-27 | coil & tube assy orig new LIM | 3.00 |
| 1121-44 | rail insulation red original | 0.30 |
| 1121-70 | straight 3rd rail & pin orig new | 0.75 |
| 1121-72 | plunger & arm assembly LIMITED | 1.00 |
| 1121-73 | switch cover complete orig used | 3.00 |
| 1121-74 | curved 3rd rail & pin RH | 0.75 |
| 1121-75 | curved 3rd rail & pin LH | 0.75 |
| 1121-87 | switch link | 0.50 |
| 1121-104 | lever spring orig LIMITED | 2.00 |
| 1121C-40 | hard red controller lens orig | 0.50 |
| 1121C-54 | shutter rivet orig LIMITED | 0.50 |
| 1121C-55R | red lens repro smooth rubber | 0.50 |
| 1121C-56R | green lens repro smooth rubber | 0.50 |
| 1121C-61 | control cover assy LIMITED | 3.50 |
| 1121C-68 | shutter link | 1.25 |
| 1122-16 | swivel rail RH orig LIMITED | 1.00 |
| 1122-18 | swivel rail LH orig LIMITED | 1.00 |
| 1122-23 | flat washer #4 steel | 0.20 |
| 1122-24 | frog bushing orig | 0.50 |
| 1122-26 | frog rail RH orig LIMITED | 1.00 |
| 1122-27 | frog rail LH orig LIMITED | 1.00 |
| 1122-29 | frog rivet orig new LIMITED | 0.50 |
| 1122-54 | motor assy RH orig new LIMITED | 5.00 |
| 1122-66 | indicator bracket assy orig LIMITED | 1.00 |
| 1122-70 | rivet LIMITED | 0.25 |
| 1122-79 | plunger assembly original LIMITED | 1.00 |
| 1122-86 | rack RH orig LIMITED | 1.00 |
| 1122-87 | rack LH orig LIMITED | 1.00 |
| 1122-89 | pinion gear orig new LIMITED | 0.80 |
| 1122-95 | swivel link assy LIMITED | 1.00 |
| 1122-97 | swivel link rivet orig LIMITED | 0.50 |
| 1122-100 | controller complete you rewire | 10.00 |
| 1122-101 | indicator bracket LIMITED | 1.00 |
| 1122-112 | end rail piece orig LIMITED | 0.75 |
| 1122-115 | socket assembly original | 2.50 |
| 1122-120 | cover screw 6-32x7/8 oval | 0.20 |
| 1122-136 | drive scew | 0.25 |
| 1122-137 | frog RH orig LIMITED | 1.00 |
| 1122-138 | frog LH orig LIMITED | 1.00 |
| 1122-149 | contoller covr assy orig used LIMIT | 3.50 |
| 1122-157 | 6" cloth wire lamp lead orig Madiso | 0.75 |
| 1122-158 | tension washer orig LIMITED | 0.50 |
| 1122-177 | lantern assy reproduction | 1.50 |
| 1122-178 | RH frog orig new LIMITED | 1.00 |
| 1122-179 | LH frog orig new LIMITED | 1.00 |
| 1122-183 | plunger assy LIMITED | 1.00 |
| 1122-207 | frog rail LH orig LIMITED | 0.75 |
| 1122-234 | fiber pin 027 track | 0.20 |
| 1130-RB | rear cab ballast orig used LIMIT | 2.00 |
| 1130-20 | rear truck assy new Lionel | 5.50 |
| 1130-53 | drawbar .160 hole orig LIMITED | 1.50 |
| 1144-ANP | adhesive nameplate 75 watt repro | 3.50 |
| 1214-54 | rivet reproduction | 0.20 |
| 1214-106 | split ring lockwasher #6 | 0.20 |
| 1214-126 | 4-40 hex nut black | 0.20 |
| 1441-303 | 14v bulb white tear drop screw base | 1.00 |
| 1442-TW | 18v bulb white tear drop screw base | 0.75 |
| 1442-TF | 18v bulb frosted tear drop | 1.00 |
| 1445-300 | 18 volt bulb bayonette base clear | 0.50 |
| 1445-301 | 18 volt bulb bayonette painted red | 0.75 |
| 1445-302 | 18 volt bulb bayo painted green | 0.75 |
| 1447-300 | 18v bulb clear screw base | 0.50 |
| 1447-301 | 18v bulb screw base painted red | 0.75 |
| 1447-302 | 18v bulb screw base painted green | 0.75 |
| 1449-300 | 14v bulb clear screw base | 0.50 |
| 1449-300GE | 14 volt screw base GE bulb (USA mad | 0.75 |
| 1449-301 | 14v bulb screw base painted red | 0.75 |
| 1449-302 | 14v bulb screw base painted green | 0.75 |
| 1456-300 | 18 volt bayo bulb large globe repro | 0.75 |
| 1550-3 | inner rail orig LIMITED | 0.50 |
| 1550-4 | curved outer rail orig | 1.00 |
| 1550-5 | frog point original new | 0.50 |
| 1550-29 | unpainted target laser repro | 0.75 |
| 1550-30 | unpainted target laser repro | 0.75 |
| 1615-ML | marker lights pair epoxy on | 3.00 |
| 1615-10 | crosshead guide | 1.00 |
| 1615-14 | front coupler bracket reproduction | 5.00 |
| 1615-22 | shoulder screw 6-32 | 0.90 |
| 1615-51 | tender drawbar | 1.50 |
| 1615-54 | cast coupler head assy full collar | 2.50 |
| 1615-56 | steamchest 1615 original LIMITED | 22.00 |
| 1615-62 | rivet .062 x .140 | 0.20 |
| 1615-63 | lamp socket assy reproduction | 4.00 |
| 1615-66 | engine drawbar LTI(no ground strap) | 1.75 |
| 1615-71 | drive rod main | 0.80 |
| 1615-80 | eccentric rod only | 0.75 |
| 1615-84 | RH main rod & crosshead | 3.50 |
| 1615-85 | LH main rod & crosshead | 3.50 |
| 1615-87 | RH ecc valve gear assy LIMIT | 7.00 |
| 1615-88 | LH ecc valve gear assy LIMIT | 7.00 |
| 1615-93 | centering spring | 0.20 |
| 1615-121 | plain slotted end wheel-new orig | 5.00 |
| 1615-123 | slotted gear wheel/axle orig LIMIT | 5.00 |
| 1615-126 | armature thrust washer (97M-15 ) | 0.25 |
| 1630-9 | silver metal pass car roof original | 7.50 |
| 1631-18 | obs railing assy complete orig LIMI | 12.00 |
| 1654-2 | drawbar for 1654,1655 | 3.00 |
| 1654-4 | washer | 0.20 |
| 1655M-5 | cluster gear orig used | 2.00 |
| 1655M-7 | cluster gear original | 2.00 |
| 1655M-8 | armature original used | 15.00 |
| 1655M-18 | gear wheel & axle orig LIMITED | 5.00 |
| 1656-ML | marker lights pair epoxy on | 3.25 |
| 1656-7 | RH ecc valve gear assy | 6.75 |
| 1656-8 | LH ecc valve gear assy | 6.75 |
| 1656-14 | cotter pin - short | 0.20 |
| 1661-7RED | wheel w/red center repro (156 trk) | 2.00 |
| 1661-8 | axle also (1661-38) | 0.30 |
| 1661-23S | lead/trail trk assy SOLID wheels | 6.50 |
| 1661-23 | lead/trail trk assy SPOKED wheels | 6.00 |
| 1661-33 | loco slide contact reproduction | 0.75 |
| 1661-38 | axle also (1661-8) | 0.30 |
| 1661E-19 | motor brush with coil spring | 0.85 |
| 1661E-29 | shouldered motor brush | 0.60 |
| 1661E-30 | motor brush spring | 0.25 |
| 1661E-31L | brush holder new Lionel ID=.180 | 1.00 |
| 1661E-31 | brush holder repro postwar ID=.155 | 1.00 |
| 1664E-4 | eccentric rod only (726 valve gear) | 1.00 |
| 1664E-16 | plain hub wheel original LIMITED | 5.00 |
| 1664E-16R | plain hub wheel reproduction | 7.00 |
| 1664E-17 | plain wheel original | 5.00 |
| 1664E-31 | gear hub wheel & axle orig new LIM | 5.00 |
| 1664E-32 | gear wheel & axle orig new LIMITED | 5.00 |
| 1664E-39 | motor screw 6-32x1 5/8 fillister | 0.25 |
| 1665-8 | steamchest original LIMITED | 20.00 |
| 1666E-NB | adhesive number plate reproduction | 1.25 |
| 1666E-2 | ornamental whistle | 0.75 |
| 1666E-6 | rear axle clip | 0.50 |
| 1666E-10 | handrail-prebent | 1.00 |
| 1666E-11 | handrail cotter pin | 0.20 |
| 1666E-14 | shouldered truck stud | 0.40 |
| 1666E-15 | shoulder screw for ecc rod | 0.60 |
| 1666E-16L | drive rod left hand orig style | 1.75 |
| 1666E-16LA | LH main rod & crosshead assy | 3.50 |
| 1666E-16R | drive rod right hand orig style | 1.75 |
| 1666E-16RA | RH main rod & crosshead assy | 3.50 |
| 1666E-16NL | side rod new Lionel w/large holes | 0.50 |
| 1666E-20 | headlite lens | 0.50 |
| 1666E-20L | headlight lens early long repro | 0.75 |
| 1666E-83 | crosshead guide with slots | 1.25 |
| 1666E-84 | groove pin reproduction | 0.90 |
| 1666E-86 | drawbar for postwar 1666 orig LIMIT | 2.75 |
| 1666M-6 | end gear wheel/axle/tire/boss | 6.00 |
| 1666M-7 | plain cnter wheel original new | 3.00 |
| 1666M-8 | geared cntr wheel&axle orig new | 5.00 |
| 1666M-11 | plain end wheel w/tire/boss | 5.00 |
| 1666T-4 | tender shell Korean Lionel Lines | 20.00 |
| 1666T-4X | tender shell repro no whistle hole | 14.00 |
| 1666T-4B | tender shell LL -Bulgaria | 15.00 |
| 1666T-5 | 2466 tndr handrail top rear preform | 1.00 |
| 1668E-9 | side rod 1666,1668,2026,2037 etc | 1.25 |
| 1668E-16 | armature original 1666,1668,221 etc | 20.00 |
| 1668E-18 | 1st inter gear assy orig new | 3.50 |
| 1668E-19 | 2nd inter gear orig new (226E-38) | 3.00 |
| 1668E-20 | contact shoe assy w/sliders | 7.00 |
| 1668E-20P | collector fiber board only orig | 3.75 |
| 1668E-24 | shoulder screw reproduction | 0.60 |
| 1668E-24S | shoulder screw stainless LIM | 1.25 |
| 1668E-43 | armature shaft pinion gear repro | 2.00 |
| 1681E-NB | number board repro-fits boiler frnt | 1.25 |
| 1684-4 | truck bracket reproduction | 3.50 |
| 1684-6 | whistle original new | 1.25 |
| 1684-7 | bell original new | 1.50 |
| 1684-8 | loco handrail 1684,1654,1655 | 0.75 |
| 1684-9 | front brkt assy orig used LIM | 4.00 |
| 1684-12 | pilot trk 1684,1654,1655,1666 etc | 5.00 |
| 1684-20 | side rod RH | 2.00 |
| 1684-21 | side rod LH | 2.00 |
| 1684-21X | side rod LH sheet metal mtr version | 2.00 |
| 1684-22 | shoulder screw short | 0.60 |
| 1684-23 | RH main rod & crosshead repro | 3.00 |
| 1684-24 | LH main rod & crosshead repro | 3.00 |
| 1684-26 | shoulder screw long | 0.60 |
| 1688E-36 | shoulder screw | 0.75 |
| 1689E-14 | axle bearing original | 1.00 |
| 1689E-17 | terminal lug | 0.80 |
| 1689E-27 | loco axle (.130) reproduction | 1.00 |
| 1695-22 | rivet | 0.30 |
| 1728-25 | fence set LIMITED | 1.50 |
| 1776-8 | window LIMITED | 1.00 |
| 1776-14 | brakewheel new Lionel | 0.35 |
| 1776-16 | front windshield LIMITED | 1.00 |
| 1776-18 | front lens LIMITED | 0.50 |
| 1776-25 | radiator cover red MPC (1776-6) | 3.50 |
| 1809-70 | collector LIMITED | 0.75 |
| 1862-SC | smoke stack cover black | 1.25 |
| 1862-4 | truck rivet stud | 0.75 |
| 1862-8 | pilot truck wheel LIMITED | 0.75 |
| 1862-9 | spring conical front truck | 0.75 |
| 1862-17 | drive rod LIMITED | 1.00 |
| 1862-18 | piston rod new Lionel | 1.50 |
| 1862-19 | worm gear LIMIT | 2.50 |
| 1862-28 | eyelet to hold General Cab | 0.30 |
| 1862-37 | axle bushing LIMITED | 0.60 |
| 1862-38 | geared wheel & axle orig | 6.00 |
| 1862-40 | lantern painted red | 2.00 |
| 1862-40B | black lantern w/gold circle LTI | 1.50 |
| 1862-41 | steam dome | 1.00 |
| 1862-42 | ornamental whistle | 0.75 |
| 1862-52 | wood pile new MPC Limited | 3.00 |
| 1862-53 | tender frame for 1862T LIMITED | 2.00 |
| 1862-54 | tender drawbar for general | 1.50 |
| 1862-63 | contact spring LIMITED | 0.75 |
| 1862-64R | ballast weight reproduction | 4.50 |
| 1862-65 | rivet | 0.20 |
| 1862-67 | engine handrail LIMITED | 1.50 |
| 1862-69 | lamp bracket LIMITED | 2.50 |
| 1862-93 | cowcatcher molded red reproduction | 8.00 |
| 1862-94 | twin piston LIMITED | 2.50 |
| 1862-95 | bell stanchion | 1.00 |
| 1862-97 | collector roller | 1.00 |
| 1862-113 | 3-48 hex hd long shouldr scr nickel | 1.25 |
| 1862-114 | 3-48 hex hd short shouldr scr nicke | 0.75 |
| 1865-8 | truss | 1.25 |
| 1865-10 | black plastic brake wheel | 0.40 |
| 1866-4AD | eagle adhesive repro decal *pair* | 2.50 |
| 1872-19 | worm gear LIMITED | 3.00 |
| 1872-28 | full band - brass | 2.00 |
| 1872-29 | small band - brass | 1.40 |
| 1872-30 | large band - brass | 1.40 |
| 1872-42 | steam pipe | 0.75 |
| 1872-46 | sand dome | 1.00 |
| 1872-49 | valve stem original Madison | 0.75 |
| 1872-52 | drive stud for cab weight | 0.25 |
| 1872-63 | smoke stack cover black | 0.75 |
| 1872-66 | air plunger LIMITED | 1.00 |
| 1872-69 | cast smoke well only - no element | 3.00 |
| 1872-77 | ballast weight for 1872 repro | 4.50 |
| 1875-5 | eyelet | 0.25 |
| 1875-78 | whistle relay bracket | 2.75 |
| 1877-4 | wire brace for flat car reproductio | 1.00 |
| 1877-5 | long brown fence repro | 1.00 |
| 1877-5L | long maroon fence new MPC | 0.75 |
| 1877-6 | short brown fence repro | 0.75 |
| 1877-6L | short brown fence-tuscan new Lionel | 0.80 |
| 1877-10BL | black horse repro like original | 2.50 |
| 1877-10BR | brown horse repro like original | 2.50 |
| 1877-10W | white horse repro like original | 2.50 |
| 1887-5 | long yellow fence nice repro | 1.00 |
| 1887-6 | short yellow fence nice repro | 0.75 |
| 1970-16 | speed nut | 0.35 |
| 1976-15 | Blue GP pilot truck w/dk blue sides | 20.00 |
| 1983-CAT | catalog 1983 trad series new | 2.00 |
| 1984-CAT | catalog 1984 trad series new | 2.00 |
| 1985-CAT1 | catalog 1985 trad series new | 2.00 |
| 1985-CAT2 | catalog 1985 collec series new | 2.00 |
| 2020-106 | worm gear reproduction LIMITED | 2.50 |
| 2020M-9 | solder lug | 0.25 |
| 2020M-17 | front bearing | 1.00 |
| 2020M-31 | nylon armature thrust collar | 0.50 |
| 2020M-33 | shouldered motor brush | 0.75 |
| 2020M-34 | motor brush coil spring | 0.25 |
| 2020M-36 | male plug & wire reproduction | 3.50 |
| 2020M-37 | armature shim washer sub 671M-23 | 0.20 |
| 2020T-4 | corner 2466 tender handrail repro | 0.60 |
| 2023-ADB | black UP 2023 adhesive decal set | 4.00 |
| 2023-ADR | red UP 2023 adhesive decal set | 4.00 |
| 2023-NBB | alco marker lens blank*pair* | 2.00 |
| 2023-6 | lock plate front | 2.50 |
| 2023-7 | lock plate rear | 1.50 |
| 2023-10 | marker lens RH orig LIMITED | 2.00 |
| 2023-11 | marker lens LH original | 1.00 |
| 2023-12 | UP nose water decal reproduction | 1.50 |
| 2023-12AD | blue adhesive nose decal UP | 1.00 |
| 2023-22 | collector assy LIMITED | 16.50 |
| 2023-26 | dummy coupler & drawbar assy orig | 5.00 |
| 2023-28 | coupler drawbar original | 1.25 |
| 2023-34 | operating alco horn low bracket rep | 10.50 |
| 2023-36 | Alco horn relay bracket | 9.00 |
| 2023-37 | insulation laser cut reproduction | 1.00 |
| 2023-38 | battery plate w/contact exact repro | 6.00 |
| 2023-38X | battery plate repro no lettering | 1.50 |
| 2023-41 | collector arm assy reproduction | 3.25 |
| 2023-43 | loco pickup roller reproduction | 0.50 |
| 2023-44 | collector roller pin | 0.35 |
| 2023-58 | alco rear step | 2.75 |
| 2023-59 | truck step orig new | 1.00 |
| 2023-80 | magnet new Lionel LIMITED | 7.00 |
| 2023-81 | red running light | 0.30 |
| 2023-82 | window shell new LIONEL | 1.50 |
| 2023-91 | long E-unit lever w/bend LIMITED | 1.00 |
| 2023-99 | coupler head original new | 1.50 |
| 2023-99R | dummy couplr head repro | 1.75 |
| 2023-103 | 11" lamp lead w/cloth wire orig | 1.00 |
| 2023-110 | gear trk side w/step new LTI | 4.00 |
| 2023-110X | gear truck side w/ladder LIMITED | 5.00 |
| 2023-111 | plain truck side with step orig | 4.00 |
| 2023-115 | insulation reproduction | 2.00 |
| 2023-117 | pinion gear reproduction | 2.50 |
| 2025-100 | motor complete orig new LIMITED | 60.00 |
| 2025-111 | axle LIMITED | 0.60 |
| 2026-8 | smoke unit assy w/liquid element | 12.50 |
| 2026-8H | smoke housing & brkt orig used | 7.50 |
| 2026-14 | motor mounting pin | 0.75 |
| 2026-16 | early steamchest original LIMIT | 20.00 |
| 2026-17 | truck plate & lamp socket | 4.50 |
| 2026-18 | front trk plate no socket LIM | 2.50 |
| 2026-24 | cast rear trk & drawbar assy | 14.00 |
| 2026-24T | cast rear truck-no drawbar original | 12.00 |
| 2026-25 | drawbar for early 2026 cast truck | 2.00 |
| 2026-28 | crosshead guide | 1.00 |
| 2026-29 | sub 8141-55 & 2029-16 | 3.00 |
| 2026-40 | RH valve gear assy | 6.75 |
| 2026-41 | LH valve gear assy | 6.75 |
| 2026-44 | smoke unit spring | 0.25 |
| 2026-45 | shouldered side rod screw reproduct | 0.60 |
| 2026-46 | center wheel screw 4-40 hex | 0.50 |
| 2026-47 | smoke piston rod | 0.50 |
| 2026-49 | smoke lever orig LIMIT | 2.50 |
| 2026-49A | smoke lever & piston assy original | 5.50 |
| 2026-53 | cloth wire & washer assy orig new | 0.75 |
| 2026-58 | lamp 18 volt clear (1445-300) | 0.50 |
| 2026-59 | clear lamp 18 volt bayonette | 0.50 |
| 2026-68 | smoke lever assy reproduction | 7.50 |
| 2026-108 | gear end wheel & axle new mag | 3.00 |
| 2026-110 | cluster gear original new | 3.50 |
| 2026-114 | gear cntr wheel & axle original | 4.00 |
| 2026-120 | armature washer sub 97M-15 | 0.25 |
| 2026-121 | brass gear repro (AKA 2035-143) | 3.00 |
| 2026-122 | axle | 0.75 |
| 2026M-4R | complete collector w/slide shoes | 7.00 |
| 2026M-4 | complete shoe with orig nameplate | 9.50 |
| 2026M-4CNP | collector namplate o27 orig new Mad | 2.50 |
| 2026M-8 | gear end wheel/tire/no boss | 5.00 |
| 2026M-14 | brushplate orig NEW LIMITED | 5.00 |
| 2026M-17 | armature orig used tested | 20.00 |
| 2028-AD | adhesive decal set Pennsy gold | 3.50 |
| 2028-85 | top plate assy LIMITED | 20.00 |
| 2028-100 | motor assy complete new LTI | 50.00 |
| 2028-109 | armature for GP new LTI LIMITED | 20.00 |
| 2028-171 | collector truck assy LIMITED | 29.00 |
| 2028-176 | bushing | 0.40 |
| 2029-15 | sleeving shrink tube 1.25" | 0.20 |
| 2029-16 | black plastic smoke element cap | 1.25 |
| 2029-16X | smoke cap-2nd quality-useable | 0.25 |
| 2031-10 | marker lens RH clear reproduction | 1.00 |
| 2031-11 | marker lens LH clear reproduction | 1.00 |
| 2031-12 | Rock island nose water decal repro | 1.50 |
| 2032-ADI | Erie Insig/Blt adhes decal*4 pc set | 2.00 |
| 2032-ADN | Erie nose adhesive decal*pair* | 2.50 |
| 2032-DI | water decal insig & blt by blk/yell | 3.00 |
| 2032-AASET | black/yellow water decal set repro | 16.00 |
| 2032-ED | Erie diamond only water decal repro | 0.75 |
| 2032-YN | Yellow Erie Nose water decal repro | 1.50 |
| 2032-SYP | yellow Erie/Blt by sides *pair* rep | 1.50 |
| 2032-10R | marker lens RH clear reproduction | 1.00 |
| 2032-10 | original RH number board | 2.00 |
| 2032-11R | marker lens LH clear reproduction | 1.00 |
| 2032-11 | original LH number board | 2.00 |
| 2033-10 | marker lens RH clear reproduction | 1.00 |
| 2033-11 | marker lens LH clear reproduction | 1.00 |
| 2034-7 | rear truck assy new LTI | 5.00 |
| 2034-9 | lamp socket original | 3.50 |
| 2034-105 | stud original LIMITED | 0.60 |
| 2034-108N | arm bearing plate new orig | 2.50 |
| 2034-108U | arm bearing plate orig used | 2.00 |
| 2034-108 | armature plate orig new | 3.50 |
| 2034-121 | brushplate assy original | 6.00 |
| 2034-126 | collector plate assy LIMITED | 8.50 |
| 2034-126P | collector plate only laser repro | 3.00 |
| 2034-148 | geared wheel orig used | 2.00 |
| 2035-6 | eccentric crank screw 4-40x11/16 | 0.20 |