| 682-6 | eccentric crank only | 1.50 |
| 682-9 | valve gear body mounting rivet | 0.95 |
| 682-11W | flanged wheel w/white rim LIM | 3.75 |
| 682-13 | side rod new LTI | 2.00 |
| 682-14 | wheel spacer with boss for linkage | 2.00 |
| 682-155 | armature bearing | 0.75 |
| 700E-WHEEL | flanged LTI wheel w/no tire | 7.50 |
| 700E-4 | pilot truck frame original Madison | 10.00 |
| 700E-10 | scale truck wheel new LTI | 1.00 |
| 700E-14 | smokestack LIMITED | 3.00 |
| 700E-15 | aux smokestack new LTI LIMITED | 1.50 |
| 700E-17 | boiler front latch | 1.00 |
| 700E-19 | boiler front lens holder black | 1.25 |
| 700E-24 | worm shaft bearing orig new | 2.00 |
| 700E-25 | crosshead support RH | 1.25 |
| 700E-28 | worm housing gasket | 0.75 |
| 700E-30 | axle bushing orig Madison | 1.50 |
| 700E-34 | trailing truck spring | 0.85 |
| 700E-36 | black trailer truck screw | 1.50 |
| 700E-37 | drive wheel tire plated nickel | 3.50 |
| 700E-38 | pilot truck shoulder screw repro | 1.50 |
| 700E-39 | hex head screw w/grooved head | 0.75 |
| 700E-42 | drive rod RH LIMITED | 5.00 |
| 700E-43 | drive rod LH LIMITED | 5.00 |
| 700E-44 | hex head eccentric crank screw repr | 0.75 |
| 700E-45 | nickle side rod screw | 0.50 |
| 700E-46 | hudson eccentric crank new Lionel | 1.50 |
| 700E-49 | groove pin | 0.35 |
| 700E-50 | valve gear bell crank | 0.75 |
| 700E-51 | eccentric rod | 1.10 |
| 700E-52 | side rod collar for 700E-39 | 0.50 |
| 700E-53 | valve gear rivet(longest) | 0.40 |
| 700E-54 | valve gear rivet(medium) | 0.40 |
| 700E-55 | valve gear rivet(shortest) | 0.40 |
| 700E-56 | crosshead link LIMITED | 0.40 |
| 700E-57 | combination lever LIMITED | 0.50 |
| 700E-58 | radius rod LIMITED | 1.25 |
| 700E-59 | crosshead screw | 0.80 |
| 700E-60 | rivet - crosshead/combo lever | 0.60 |
| 700E-61 | crosshead | 1.50 |
| 700E-62 | crosshead support LH orig Madison | 3.50 |
| 700E-63P | trailer trk axle w/3 shoulders orig | 2.00 |
| 700E-65 | screw combo lever rad rod LIMITED | 0.75 |
| 700E-66 | valve stem crosshead LIMITED | 5.85 |
| 700E-68 | throttle fulcrum | 1.25 |
| 700E-69N | threaded nickel flag post | 1.50 |
| 700E-69B | threaded black flag post | 1.50 |
| 700E-70B | taller stanchion & nut black | 0.85 |
| 700E-70N | taller stanchion & nut nickle | 0.85 |
| 700E-81 | bottom separator D/C raw | 0.75 |
| 700E-82 | power reverse cylinder LIMITED | 4.50 |
| 700E-83 | turbo generator w/screw orig Madiso | 2.75 |
| 700E-84 | booster steam coupling LIMITED | 1.90 |
| 700E-85 | ornamental whistle & nut | 2.00 |
| 700E-86 | safety valve LIMITED | 1.60 |
| 700E-87 | syphon valve | 1.00 |
| 700E-88 | booster steam pipe RH LIMITED | 1.50 |
| 700E-90 | injector delivery pipe LIMITED | 0.75 |
| 700E-92 | pipe, spr htr to blower LIMITED | 0.50 |
| 700E-93 | air pump steam pipe LIMITED | 2.00 |
| 700E-94 | air brake reservoir crossover pipe | 1.00 |
| 700E-95 | U bolt | 0.50 |
| 700E-96 | valve rod guide | 0.30 |
| 700E-97 | feedwater htr dlv pipe LIMITED | 0.50 |
| 700E-98 | pipe, feedwatr pmp to htr LIMITED | 1.00 |
| 700E-99 | booster exhaust LH pipe LIMITED | 1.25 |
| 700E-102 | feedwater pump new Lionel | 1.50 |
| 700E-103 | feedwater pipe new Lionel LIMITED | 3.00 |
| 700E-104 | screw w/hole in head, feedwater | 1.25 |
| 700E-105 | double pipe clamp LIMITED | 0.90 |
| 700E-106 | pipe flange | 1.00 |
| 700E-108 | injector suction pipe LIMITED | 1.00 |
| 700E-113 | collector bracket orig LIMITED | 2.00 |
| 700E-115 | nickle collector pivot | 1.00 |
| 700E-116 | collector spring | 0.50 |
| 700E-118 | bell frame | 1.75 |
| 700E-121 | power reverse rod LIMITED | 0.60 |
| 700E-122 | reach rod new LTI | 2.25 |
| 700E-123 | valve gear rod LIMITED | 2.00 |
| 700E-124 | smoke box front handrail LIMITED | 2.00 |
| 700E-125 | cplr head less knuckle orig Madison | 2.50 |
| 700E-127 | scale knuckle coupler pin | 1.70 |
| 700E-128 | coupler lock bar LIMITED | 0.50 |
| 700E-131 | drawbar pin exact repro | 4.00 |
| 700E-132 | valve gear connecting rod LH | 1.00 |
| 700E-133 | valve gear connecting rod RH | 1.00 |
| 700E-134 | valve gear link | 1.00 |
| 700E-135 | rivet for lube lever assy | 0.50 |
| 700E-145 | nut for coupler retaining bolt | 1.00 |
| 700E-146 | valve link fulcrum screw | 0.85 |
| 700E-148 | piston rod | 1.00 |
| 700E-150 | side rod bushing | 0.40 |
| 700E-151 | eccentric crank sleeve | 0.60 |
| 700E-152 | drawbar chain reproduction | 1.50 |
| 700E-157 | handrail RH LIMITED | 1.50 |
| 700E-158 | handrail LH LIMITED | 1.50 |
| 700E-159 | coupler retaining bolt LIMITED | 1.00 |
| 700E-160 | coupler chain | 1.00 |
| 700E-161 | boiler front lens repro | 1.00 |
| 700E-165 | red rhinestone | 0.25 |
| 700E-166 | rhinestone green | 0.25 |
| 700E-166C | clear rhinestone | 0.25 |
| 700E-167 | rhinestone amber | 0.25 |
| 700E-170 | solder lug | 0.30 |
| 700E-173 | coupler pin for cow catcher | 0.75 |
| 700E-175 | chain ring link | 0.20 |
| 700E-176 | black stanchion nut (2-56 thread) | 0.25 |
| 700E-177 | pipe-feedwater delivery | 0.80 |
| 700E-179 | throttle rod | 1.50 |
| 700E-182 | feedwater pump pipe LIMITED | 2.00 |
| 700E-183 | pipe, feedwater pmp to htr LIMITED | 2.75 |
| 700E-185 | boiler front door hinge rivet | 0.20 |
| 700E-187 | internal tooth lockwasher #4 | 0.20 |
| 700E-188 | internal tooth lockwasher #6 | 0.20 |
| 700E-189 | retaining ring | 0.50 |
| 700E-192 | valve gear rod pin LIMITED | 1.25 |
| 700E-194 | reach rod screw new LTI | 0.75 |
| 700E-210 | trail trk small wheel & axle assy | 3.75 |
| 700E-211 | trail trk spoke wh/axl assy LIMITED | 4.00 |
| 700E-212 | side rod assy RH Lionel LIMITED | 6.00 |
| 700E-213 | side rod assy LH Lionel LIMITED | 6.00 |
| 700E-216 | RH ecc partial rod assy new LTI | 10.60 |
| 700E-217 | LH ecc partial rod assy new LTI | 10.60 |
| 700E-218 | combination lever assy LIMITED | 2.25 |
| 700E-219 | lubricator lever assy LIMITED | 4.50 |
| 700E-227 | coupler lift bar assy | 7.20 |
| 700E-233 | ornamental bell | 2.25 |
| 700E-239 | crosshead assy RH LIMIT | 3.00 |
| 700E-242 | feedwater bracket assy LIMITED | 6.00 |
| 700E-245 | coupler assy new LTI Limited | 6.00 |
| 700E-258 | outside collector orig LIMITED | 20.00 |
| 700E-270 | headlight socket/bracket assy | 6.00 |
| 700E-279 | throttle rod fulcrum LIMITED | 5.25 |
| 700E-308 | scale cplr knuckle orig Madison | 1.50 |
| 700E-312 | worm shaft coupling orig LIMITED | 5.00 |
| 700E-312SS | 4-48 head set screw 700E-312/313 | 0.25 |
| 700E-313 | armature shaft coupling LIMITED | 5.00 |
| 700E-314 | flexible coupling - repro LIMITED | 10.00 |
| 700T-6 | rear step stamped for cast tender | 1.00 |
| 700T-19 | grab handle stainless LIMITED | 1.00 |
| 700T-23 | brake cylinder orig Madison | 2.50 |
| 700T-34 | scale coupler assy complete LIMITED | 4.25 |
| 703-10R | smoke lamp 18 volt reproduction | 5.00 |
| 711-NP | o72 nameplate original new | 2.50 |
| 711-52 | red lens dish type MPC | 0.25 |
| 711-52F | red lens flat type postwar | 0.25 |
| 711-53 | green lens dish type MPC | 0.25 |
| 711-53F | green lens flat type postwar | 0.25 |
| 711-54 | lantern O22 flat lens repro | 1.25 |
| 711-54M | "O" lantern with bullseye lens | 1.25 |
| 711-65 | drawbar or retainer rivet | 0.50 |
| 711-77 | plunger & arm assembly | 1.50 |
| 711-100 | binding post original new LIMITED | 1.00 |
| 711-100M | binding post (metric) | 0.50 |
| 711-100R | binding post O22 motor easy install | 0.50 |
| 711-111 | lantern retainer pivot rivet | 0.50 |
| 711-113 | lock hinge | 0.75 |
| 711-119 | cast lantern retainer reproduction | 3.00 |
| 711-127 | switch coil original | 2.50 |
| 711-129 | terminal plate | 3.00 |
| 711-150 | rack & pin | 1.50 |
| 711-151 | fixed voltage plug repro | 2.00 |
| 711-203 | lamp bracket only no socket | 0.50 |
| 711-207E | eyelet for early lamp brackets N/B | 0.20 |
| 711-207R | rivet for later lamp brackets | 0.20 |
| 711-211 | lamp bracket w/screw socket | 1.25 |
| 711C-24 | control lever spring | 0.60 |
| 711C-25 | shoulder rivet for o22 lever | 0.60 |
| 714-10 | door latch reproduction | 1.50 |
| 714-16 | drive screw for gateman arm | 0.20 |
| 714-20 | merchandise car end orig LIMITED | 10.00 |
| 714-188 | step for scale boxcar | 1.50 |
| 715-10 | tank car ladder | 1.50 |
| 715-14 | air brake drive screw use 202-9 | 0.25 |
| 715-17 | air brake original new | 1.50 |
| 715-17L | airbrake new Lionel w/larger hole | 1.00 |
| 715-18 | tank car step black | 1.00 |
| 715-19 | tank car placard holder flag | 0.60 |
| 715-21 | metal brakewheel with pin | 0.60 |
| 716-10 | door bearing cap reproduction | 0.75 |
| 717-14 | cast smoke stack repro | 1.25 |
| 717-54 | 18v bayo light bulb (1456-300) | 0.75 |
| 721-19 | lever cast repro painted red | 2.40 |
| 721-38 | cover spring | 0.75 |
| 726-LENS | headlite lens repro | 1.00 |
| 726-SSB | smokestack brush original LIMITED | 5.00 |
| 726-20 | insulating plate laser repro | 3.50 |
| 726-21 | collectr insul fiberglass tubing | 0.25 |
| 726-22 | cover plate assy orig new LIMITED | 20.00 |
| 726-24 | insulator bushing repro | 0.75 |
| 726-25 | side rod reproduction | 2.00 |
| 726-29 | pinion gear original LIMITED | 3.50 |
| 726-32 | axle bearing original new | 1.50 |
| 726-34 | LH main rod & crosshead assy | 3.50 |
| 726-35 | main rod only no crosshead | 1.00 |
| 726-36 | RH ecc rod assy | 6.75 |
| 726-37 | LH ecc rod assy | 6.75 |
| 726-38 | valve gear screw reproduction | 0.75 |
| 726-38B | valve gear screw black Lionel | 0.60 |
| 726-39 | eccentric crank spacer | 0.75 |
| 726-42 | RH main rod & crosshead assy | 3.50 |
| 726-43 | cast trailr trk & drawbar repro | 17.50 |
| 726-45 | short drawbar for early berk | 2.00 |
| 726-46 | shoulder screw reproduction | 0.75 |
| 726-47 | flapper crank original Madison | 2.00 |
| 726-49 | crosshead drive screw | 0.30 |
| 726-51 | e-unit w/spring 671,726 new LTI | 30.00 |
| 726-57 | stack gasket dark grey | 0.25 |
| 726-59 | flapper - laser reproduction | 4.00 |
| 726-63 | ecc baldwin center wheel orig new | 6.00 |
| 726-64 | plain baldwin center wheel orig new | 6.00 |
| 726-66 | crosshead with open top | 1.25 |
| 726-70 | crosshead screw RH w/pusher repro | 1.50 |
| 726-82 | worm gear (1946 berk) 23 teeth | 2.50 |
| 726-84 | flapper clamp laser repro | 2.50 |
| 726-94 | smoke stack aluminum | 1.50 |
| 726-99 | smoke lever | 1.00 |
| 726-100 | smoke push rod | 1.00 |
| 726-101 | collector insulation laser repro | 2.00 |
| 726-104 | nickel plated flagholder repro | 1.00 |
| 726-109 | handrail | 1.00 |
| 726-112 | ornamental whistle reproduction | 2.00 |
| 726-116 | flapper crank shaft orig LIMITED | 7.50 |
| 726-122 | cloth wire & washer assy orig new | 0.75 |
| 726-125 | worm gear | 3.50 |
| 726-127 | motor shim laser reproduction | 2.50 |
| 726M-3 | field spool half black nylon | 1.00 |
| 726W-14 | whistle mounting stud | 0.30 |
| 736-LENS | headlite lens repro | 1.00 |
| 736-5 | axle swaged non magnetic | 1.50 |
| 736-7 | end wheel original | 5.00 |
| 736-9 | slotted center wheel LIMIT | 6.00 |
| 736-10 | magnet for berk/turbine frame LIMIT | 6.00 |
| 736-12 | side rod screw | 0.60 |
| 736-14 | plain center wheel Madison | 3.00 |
| 736-16 | collector assy use 681-4 | 8.00 |
| 736-21 | drawbar for berkshire | 2.00 |
| 736-22 | boiler front groove pin .064 | 0.40 |
| 736-24 | boiler frnt assy door opens new LTI | 26.00 |
| 736-29 | cup shaped lock washer | 0.20 |
| 736-30 | eccentric crank screw 4-40x5/8F | 0.20 |
| 736-34 | LH main rod & crosshead assy | 3.50 |
| 736-42 | RH main rod & crosshead assy | 3.50 |
| 736-44 | lever smoke unit LIMIT | 1.00 |
| 736-46 | rear truck shoulder screw-short | 1.25 |
| 746-TS | N&W tender shell long stripe repro | 20.00 |
| 746-ADS | adhesive stripe set for 746 boiler | 5.00 |
| 746-ADT | N & W adhesive tender decals *pair* | 3.50 |
| 746-7 | RH handrail new Lionel LIMITED | 1.75 |
| 746-10 | lens for boiler front LIMITED | 2.00 |
| 746-12 | boiler front (no lens) | 4.00 |
| 746-13 | LH handrail new Lionel LIMITED | 1.75 |
| 746-20 | steamchest original Madison LIMITED | 20.00 |
| 746-25 | collector assy new Lionel | 6.00 |
| 746-33 | lever smoke unit | 1.00 |
| 746-34 | drive rod assy LH LIMITED | 3.50 |
| 746-35 | RH crosshead MPC w/pusher LIMITED | 0.75 |
| 746-36 | drive rod assy RH LIMITED | 3.50 |
| 746-40 | valve gear assy RH LIMITED | 5.00 |
| 746-42 | valve gear assy LH LIMITED | 5.00 |
| 746-49 | crosshead drive screw black hex LIM | 0.50 |
| 746-50 | trailing truck complete new LTI Lim | 12.50 |
| 746-54 | drawbar class J | 1.50 |
| 746-58 | smoke unit bracket LIMITED | 0.50 |
| 746-60X | smoke unit sub 8100-60 LIMIT | 15.00 |
| 746-67 | whistle aluminum fits 746 boiler | 1.00 |
| 746-68 | drive screw for boiler whistle | 0.20 |
| 746-74 | smoke piston with hole class J | 2.50 |
| 752-9 | 18 volt bulb use 1447-300 | 0.50 |
| 752-13 | motor mounting screw | 1.00 |
| 752M-49 | axle original new | 1.00 |
| 763E-132 | RH valve gear connecting rod | 0.60 |
| 763E-133 | LH valve gear connecting rod | 0.60 |
| 771-12 | socket tool (700E-176 nut) Madison | 3.00 |
| 771C-6 | term clip 252 gate/CTC lock | 0.35 |
| 773-ROLL | pickup roller repro for 773 | 0.75 |
| 773-MFS | oversized motor field stud original | 1.50 |
| 773-MF | oversized motor field orig Madison | 7.50 |
| 773-15 | axle bushing LIMIT | 1.25 |
| 773-16 | worm wheel LIMITED | 5.00 |
| 773-19 | drive axle swedged | 2.25 |
| 773-20 | drive axle plain | 2.00 |
| 773-22 | end wheel w/cr pin new Lionel | 6.50 |
| 773-24 | crank pin case hard | 0.75 |
| 773-26 | center wheel new LTI LIMITED | 6.50 |
| 773-28 | center wheel new Lionel LIMITED | 6.00 |
| 773-30 | worm shaft assy LIMITED | 10.00 |
| 773-31 | worm shaft original LIMITED | 5.00 |
| 773-35 | worm housing cover | 1.00 |
| 773-43 | crosshead support LH | 1.25 |
| 773-45 | side rod screw reproduction | 0.60 |
| 773-48 | crosshead screw orig new | 1.00 |
| 773-51 | crosshead assy LH w/pusher LIMITED | 3.00 |
| 773-52 | smoke cam (pusher) | 1.50 |
| 773-57 | late 1964 hudson collector assy | 6.50 |
| 773-58 | collector arm assy new Lionel LIMIT | 2.00 |
| 773-62 | insulation bushing LIMIT | 1.25 |
| 773-63 | collector insert | 1.50 |
| 773-64 | pilot truck frame assy LIMITED | 4.50 |
| 773-65 | pilot truck complete MPC | 15.00 |
| 773-67 | pilot truck wheel new Lionel | 0.60 |
| 773-69 | spring trailing truck | 0.60 |
| 773-70 | link for pilot truck new Lionel | 1.60 |
| 773-71 | link stud LIMITED | 1.75 |
| 773-72 | pilot truck screw | 1.50 |
| 773-73 | washer | 0.35 |
| 773-74 | link screw LIMITED | 1.00 |
| 773-79 | hex head drive screw new LIONEL | 0.60 |
| 773-85 | ashpan | 3.50 |
| 773-86 | retaining stud original | 1.25 |
| 773-87 | drawbar original or new LTI | 3.50 |
| 773-93 | cloth wire & washer assy orig new | 0.75 |
| 773-128 | black sleeve (spaghetti) 6.25 inch | 0.75 |
| 773-145 | eccentric crank screw (700E-44) | 0.60 |
| 773-146 | long crank pin stud LIMIT | 0.75 |
| 773-212X | large stack armature orig new LIMIT | 30.00 |
| 773-300R | rebuilt e-unit orig postwar LIMITED | 25.00 |
| 779-B | 736 boiler complete-trimmed w/front | 40.00 |
| 810-62 | eyelet ZW-plate or KW Emblem | 0.25 |
| 927-60 | tube of oil orig Madison LIMITED | 1.50 |
| 927-65 | tube of lube orig Madison LIMITED | 1.50 |
| 943-5 | arming wire reproduction | 3.00 |
| 1001-5 | front bracket orig used | 3.00 |
| 1001-7 | front truck reproduction | 5.00 |
| 1001-13 | rear truck orig used LIMITED | 4.00 |
| 1001-16 | motor mounting pin reproduction | 2.00 |
| 1001-18 | side rod reproduction | 2.00 |
| 1001-19 | side rod shoulder screw repro | 0.60 |
| 1001-21B | crosshead black oxide | 0.50 |
| 1001-21N | crosshead nickel like orig | 0.50 |
| 1001M-3 | lamp contact strip | 0.50 |
| 1001M-5 | roller contact strip | 0.50 |
| 1001M-6 | roller original used | 0.50 |
| 1001M-7 | axle contact strip | 0.50 |
| 1001M-8 | lamp socket strip | 1.00 |
| 1001M-9 | stationary field | 2.50 |
| 1001M-15 | moveable field | 1.50 |
| 1001M-19 | reverse lever orig new | 0.50 |
| 1001M-21 | pawl original | 0.50 |
| 1001M-22 | pawl spring original | 1.00 |
| 1001M-23 | armature orig used tested | 3.50 |
| 1001M-28 | pinion gear new LTI | 1.00 |
| 1001M-31 | gear shaft | 0.25 |
| 1001M-33 | cluster gear orig used LIMIT | 1.50 |
| 1001M-34 | iron gear orig used | 2.00 |
| 1001M-35 | housing clamp | 0.50 |
| 1001M-37 | plain wheel | 1.00 |
| 1001M-42 | RH drum/large brush holder orig | 1.00 |
| 1001M-43 | LH drum/large brush holder orig | 1.00 |
| 1001M-46 | shouldered scout brush reproduction | 0.75 |
| 1001M-47 | shouldered brush spring repro | 0.25 |
| 1001M-48 | drum housing cover | 0.50 |
| 1001M-51 | gear sintered original | 2.00 |
| 1001M-56 | cluster gear orig used | 1.50 |
| 1001M-57 | rear plain wheel orig new LIM | 3.00 |
| 1001M-57X | front plain wheel orig new LIM | 3.00 |
| 1001M-63 | gear wheel&axle assy orig LIMITED | 3.00 |
| 1001M-63X | front gear wheel original LIMITED | 3.00 |
| 1002-5 | truck mounting eyelet | 0.20 |
| 1002-6 | clip reproduction black .145 | 0.50 |
| 1004-7 | boxcar frame original | 2.00 |
| 1008-C | camtrol for 027 track original | 2.00 |
| 1008-SPR | spring for camtrol orig Madison | 0.50 |
| 1011-24 | orange handle fits #1033, KW | 3.50 |
| 1011-26 | black cord 6' molded plug UL approv | 3.00 |
| 1011-78 | binding post LIMITED | 0.60 |
| 1011-100 | compression ring | 0.50 |
| 1013-17 | "o27" steel track pin $1.60/doz | 0.20 |
| 1013-17X | O27 track pins(12) reconditioned | 1.00 |
| 1015-53 | cup washer | 0.25 |
| 1015-54 | spring LIMITED | 0.25 |
| 1017-21 | fiber spacer fits ZW | 0.35 |
| 1022-19 | LH frame & gear assy LIMITED | 2.00 |
| 1022-26 | gear cover RH original | 1.50 |
| 1022-27 | gear cover LH original | 1.50 |
| 1022-28 | throw lever orig new LIMITED | 1.75 |
| 1022-29 | red switch indicator | 2.00 |
| 1024-9 | frog rail RH original new | 1.00 |
| 1024-10 | frog rail LH original new | 1.00 |
| 1024-13 | rivet - original | 0.30 |
| 1024-15 | switch spacer original new | 0.35 |
| 1024-65 | RH inner curved rail orig LIMITED | 1.00 |
| 1024-66 | LH inner curved rail orig LIMITED | 1.00 |
| 1024-67 | outer straight rail RH orig | 1.00 |
| 1024-68 | outer straight rail LH orig | 1.00 |
| 1028-5 | steel washer with square hole | 0.40 |
| 1032-CB | orig 75 watt circuit breaker | 5.00 |
| 1032-10 | nameplate orig new | 3.00 |
| 1033-4 | case original LIMITED | 10.00 |
| 1033-14 | stack rivet orig new LIMITED | 1.00 |