| 482-1U | front tender roller trk used | 7.50 |
| 482-3 | baseplate & roller reproduction | 5.00 |
| 482-5 | baseplate frame only no arm | 1.25 |
| 483-2 | coupler plate &slide shoe new assy | 7.50 |
| 483-5 | bottom frame new LTI | 1.00 |
| 483-7 | eyelet | 0.20 |
| 484-1 | crane truck orig new Madison | 8.50 |
| 484-4 | pivot stud for crane truck | 1.50 |
| 485-3 | truck side new LTI LIMITED | 4.00 |
| 485-10 | coupler head LIMIT | 2.25 |
| 485-11 | lockpin assembly | 2.25 |
| 485-16 | truck stud | 0.60 |
| 485-17 | pivot washer | 0.75 |
| 485-18 | armature & bottom frame assy | 5.50 |
| 485-20 | armature plate | 0.75 |
| 485-22 | contact eyelet | 0.40 |
| 485-25 | rivet-culvert beams | 0.30 |
| 485-26 | collector assembly reproduction | 4.00 |
| 485-28 | coupler head assy | 3.00 |
| 485-30 | spring rivet | 0.25 |
| 485-31 | spring for lockpin assy | 0.25 |
| 485-32 | collector spring | 0.25 |
| 486-1 | obsv rear trk w/pick up LIMITED | 15.00 |
| 487-3 | truck side new LTI LIMITED | 2.50 |
| 487-3M | truck side new Lionel cone holes | 2.50 |
| 487-9 | drawbar & coupler assy | 4.00 |
| 487-12 | bottom frame assembly LIMIT | 1.50 |
| 487-20 | lock link | 1.25 |
| 487-21 | lock link spring | 0.25 |
| 487-22 | centering spring | 0.25 |
| 487-23 | drawbar stud | 0.60 |
| 487-26 | pivot stud repro (CP-58) | 0.50 |
| 488-4 | bottom frame collector assy LIMITED | 5.00 |
| 488-5 | bottom frame | 1.00 |
| 490-7 | drawbar assembly | 4.00 |
| 490-10 | bottom frame reproduction | 3.50 |
| 494-10 | nameplate orig new LIMITED | 2.50 |
| 494-10A | 494 beacon adhesive plate repro | 2.40 |
| 494-14 | insulated bushing | 0.75 |
| 494-15 | lamp contact | 1.25 |
| 494-17 | beacon top assembly reproduction | 5.00 |
| 494-20 | lens bracket assembly reproduction | 6.00 |
| 494-31 | rivet for center of coil assy LIMIT | 1.50 |
| 494-40 | coil & socket assy original LIMITED | 12.50 |
| 497-10 | rivet 497 support to base or hopper | 0.20 |
| 497-15 | coaling station hopper new Lionel | 4.00 |
| 497-17 | crossbar LIMITED | 1.50 |
| 497-30 | idler pulley | 0.75 |
| 497-31 | idler pulley shaft | 1.00 |
| 497-34 | sign strip | 0.75 |
| 497-50 | chute coaling station | 1.75 |
| 497-51 | boxcar lockpin & rubber stop | 1.00 |
| 497-51CP | chute pivot coal loader MPC | 0.75 |
| 497-63 | roof grey MPC | 4.00 |
| 497-63P | roof painted green like orig | 8.50 |
| 497-102 | controller cover reproduction | 15.00 |
| 497-220 | terminal plate assy LIMITED | 5.00 |
| 500-1 | scout cplr truck orig used LIM | 3.00 |
| 500-5 | scout truck side | 0.50 |
| 500-6 | coupler head orig LIMIT | 1.00 |
| 500-78 | rivet (.088 x 5/32) | 0.20 |
| 500-115 | eyelet to fasten 6805-9 bracket | 0.20 |
| 500-179 | rivet | 0.20 |
| 501-1 | scout plain trk orig used LIM | 2.00 |
| 516-BPS | brass adhesive plate set(4) repro | 6.00 |
| 520-12 | pantograph spring-reproduction | 0.50 |
| 520-30M | dummy coupler metal reproduction | 2.00 |
| 520-30P | dummy coupler plastic | 0.75 |
| 520-31 | shoulder rivet | 0.50 |
| 520-32 | long flat coupler spring | 0.75 |
| 520-35 | pantograph assy reproduction | 6.50 |
| 520-50 | pilot truck for box electric repro | 12.00 |
| 520-51 | shoulder screw for 520-50 truck | 1.25 |
| 520-56 | truck link reproduction | 2.50 |
| 520-61 | truck spacer original LIMITED | 1.00 |
| 521-1 | light coupler truck original | 20.00 |
| 521-4 | frame assy orig rebuilt Madison | 15.00 |
| 521-7 | swivel bracket orig LIMITED | 1.00 |
| 521-8 | alignment spring reproduction | 0.50 |
| 521-9 | shoulder rivet | 0.60 |
| 522-1T | pass car trk only no baseplate orig | 6.00 |
| 530-40 | rivet | 0.20 |
| 530-44 | rivet | 0.20 |
| 550-8 | eyelet for 1121 switch | 0.20 |
| 565-26 | rubber stop for lock pin | 0.25 |
| 565-45 | lamp contact socket | 0.40 |
| 565-124 | HO motor brush reproduction | 1.25 |
| 566-2 | dummy AAR truck -non op cplr-used | 4.00 |
| 566-7 | locking pin new Lionel LIMITED | 0.80 |
| 566-16 | rivet timken or MPC trucks | 0.20 |
| 566-18 | spring rivet reproduction | 0.20 |
| 566-27R | sub 9050-56 & TC-23 | 0.70 |
| 566-32 | wheel & axle set original | 1.00 |
| 566-50C | coupler truck China reproduction | 5.50 |
| 566-50 | orig used timken trk open journals | 5.00 |
| 566-60 | armature pin original new | 0.25 |
| 566-61 | wheel set for 566-50 truck | 1.00 |
| 566-151 | wheels,cam & axle original LIMITED | 2.50 |
| 567-1 | or 567-50 plain truck no coupler | 3.50 |
| 568-50 | dummy AAR truck orig used postwar | 4.00 |
| 581-5 | collector arm spring reproduction | 0.50 |
| 581-9 | ground spring reproduction | 2.00 |
| 581-10 | collect carriage reproduction | 6.00 |
| 582-3 | truck stud reproduction | 0.75 |
| 584-26 | ground washer AKA 6TCL-13 | 1.00 |
| 600-AD | MKT 600 white adhesive decal *pr* | 3.00 |
| 600-11 | end rail orig LIMITED | 3.00 |
| 600-12 | front platform original | 4.00 |
| 600-15R | freight trk press pin repro .100 | 0.25 |
| 600-16 | step rivet sub 622-17 | 0.20 |
| 600-19R | gold bell reproduction | 2.00 |
| 600-21 | coupler bracket | 1.75 |
| 600-25 | ornamental horn | 0.60 |
| 600-36 | collector assy reproduction | 6.00 |
| 600-37 | collector spring | 0.30 |
| 600-38 | pickup truck assy orig LIMITED | 25.00 |
| 600-104 | brass bearing for mag axle | 1.25 |
| 600-109R | bearing housing reproduction | 2.50 |
| 600-110 | ball bearing | 0.35 |
| 600-111 | drive gear reproduction | 2.75 |
| 600-117 | metal coupler plunger long arms | 2.00 |
| 600-119G | worm wheel only | 2.50 |
| 600-119 | worm and shaft assy orig LIMITED | 4.50 |
| 600-121 | motor brush fits most locos | 0.50 |
| 600-123 | GP9 field assy LIMITED | 8.00 |
| 600-129 | nylon thrust collar reproduction | 0.25 |
| 600-130 | spring same as 1055-56 | 0.25 |
| 600-131 | cupwasher diesel motor mount | 0.25 |
| 600-133 | speednut diesel motor mount | 0.25 |
| 600-136 | brass bearing for plain axle | 1.25 |
| 600-137 | gear wheel & axle assy | 3.00 |
| 600-138 | plastic centr plunger long arms | 0.75 |
| 600-139 | cast coupler head full collar | 1.25 |
| 601-AD | Seaboard adhesive decal *pair* | 1.50 |
| 601-D | seaboard heart water decal reproduc | 1.50 |
| 601-6 | frame skirt new Lionel LIMITED | 3.00 |
| 601-40 | Seaboard heart adhesive decal *pair | 2.00 |
| 601-55 | horn assy reproduction | 19.50 |
| 601-55M | orig working horn assy LIMITED | 17.50 |
| 601-60 | insulation orig new | 0.35 |
| 601-61 | battery spring reproduction | 2.00 |
| 601-63 | insulated rivet reproduction | 0.60 |
| 601-131 | motor mounting cup washer | 0.25 |
| 614-AD | Alaska adhesive decal paint set | 4.50 |
| 616-13 | 14v bulb(1449-300) screw base 1656 | 0.50 |
| 616-148 | coupler centering plunger | 0.75 |
| 621-18 | orange JC Lines adhes decal repro | 0.90 |
| 621-18W | white JC Lines adhesive decal repro | 0.90 |
| 622-ADS | ATSF & 622 adhesive decal set | 3.75 |
| 622-GMB | 1/4" GM black water decal repro | 1.00 |
| 622-GMA | 1/4" GM white adhesive decal *pair* | 1.00 |
| 622-GMR | 1/4" GM red water decal repro | 1.00 |
| 622-5B | black smoke stack repro | 1.75 |
| 622-5Y | yellow smoke stack painted repro | 2.00 |
| 622-5BL | blue smokestack reproduction | 1.50 |
| 622-7 | lockplate reproduction | 2.50 |
| 622-8 | horn for diesel switcher | 0.75 |
| 622-9R | black plastic bell reproduction | 2.00 |
| 622-9 | black bell original Madison | 3.00 |
| 622-10 | radio wheel | 1.50 |
| 622-11 | long front lens reproduction | 1.00 |
| 622-12 | lens rear repro | 0.50 |
| 622-13 | &-14 marker lens clear LH/RH | 1.50 |
| 622-15 | cab handrail reproduction | 1.50 |
| 622-17 | rivet | 0.20 |
| 622-25 | socket assy new Lionel | 2.25 |
| 622-28 | pinion shaft | 0.40 |
| 622-31 | gear drive wheel original LIMITED | 2.50 |
| 622-34 | axle bearing for magnetic axle | 0.75 |
| 622-36B | brass pinion gear reproduction | 2.50 |
| 622-36S | steel pinion gear reproduction | 2.50 |
| 622-41 | plain trk side new Lionel | 4.75 |
| 622-43 | bell hammer bracket laser repro | 4.00 |
| 622-46 | bell hammer spring | 0.60 |
| 622-47 | pawl | 0.75 |
| 622-48 | hammer shaft reproduction | 0.75 |
| 622-50 | pawl wheel pivot screw | 0.60 |
| 622-51 | worm axle new Lionel | 1.50 |
| 622-52B | bell mount bracket tapped | 3.00 |
| 622-52R | E unit mount bracket | 1.25 |
| 622-53 | bell hammer arm LIMIT | 3.50 |
| 622-54 | bell spacer | 0.40 |
| 622-55 | coupler drawbar and rivet orig | 1.50 |
| 622-56 | drawbar pivot rivet reproduction | 0.75 |
| 622-57 | centering spring | 0.60 |
| 622-58 | cplr, drawbar & pivot riv orig LIMI | 15.00 |
| 622-58D | drawbar only original | 3.00 |
| 622-58R | coupler & drawbar postwar used | 9.50 |
| 622-60 | truck mounting screw | 0.75 |
| 622-62M | bell trk Madison wheels/axles only | 10.00 |
| 622-63 | truck pivot bracket laser repro | 2.50 |
| 622-64 | bell truck pivot bracket | 2.50 |
| 622-68 | shoe rivet use 480-20 | 0.20 |
| 622-69 | washer for 622-22 swivel plate | 0.20 |
| 622-71 | worm wheel fits mag axle | 3.00 |
| 622-72 | E-unit mounting bracket | 1.50 |
| 622-76 | end handrail | 1.00 |
| 622-77 | handrail support | 0.25 |
| 622-79 | side handrail | 0.75 |
| 622-80 | rear cab handrail | 1.00 |
| 622-81 | pilot original used LIMIT | 3.50 |
| 622-85 | gear trk side w/o step new LTI | 3.00 |
| 622-86 | lamp lead original cloth wire | 0.75 |
| 622-95 | wire clamp | 0.75 |
| 622-97 | handrail stanchion | 0.20 |
| 622-100 | motor complete new LTI Limited | 44.00 |
| 622-106 | motor field stud rivet style | 1.75 |
| 622-114 | brushplate assembly new Lionel | 7.50 |
| 622-117 | brush holder | 0.75 |
| 622-118 | brush spring use 622-191 | 0.25 |
| 622-119 | wick for brushplate | 0.50 |
| 622-121 | slotted diesel motor brush each | 0.60 |
| 622-123 | rivet attaches pilot to frame | 0.20 |
| 622-125 | water decal Santa Fe center cab | 1.50 |
| 622-125AD | Santa Fe adhesive decal *pair* | 1.75 |
| 622-126AD | GM black adhesive decals *pair* | 1.50 |
| 622-133 | conical grounding spring repro | 0.20 |
| 622-134 | collector assy complete LIMITED | 16.50 |
| 622-136 | geared diesel wheel only original | 2.00 |
| 622-137 | solid diesel wheel sub 2343-33 | 1.75 |
| 622-138 | collector roller reproduction | 0.50 |
| 622-139 | collect arm original (wide) | 3.50 |
| 622-143 | geared wheel & knurled mag axle | 8.50 |
| 622-143W | gear wheel for mag axle original | 3.00 |
| 622-144 | gear wheel & plain mag axle | 8.50 |
| 622-145 | RH collector spring | 0.50 |
| 622-146 | LH collector spring | 0.50 |
| 622-155 | shouldered bearing rear | 1.00 |
| 622-172 | motor housing tapped LIMITED | 6.00 |
| 622-176 | gear wheel & plain axle orig new | 6.00 |
| 622-177 | plain stainless axle | 1.50 |
| 622-178 | gear wheel & swaged axle orig LIM | 6.00 |
| 622-179 | stainless swaged axle | 2.00 |
| 622-181 | brass worm gear LIMITED | 2.50 |
| 622-184 | axle bearing | 0.75 |
| 622-191 | motor brush spring | 0.35 |
| 622-216 | brushplate armature bearing | 0.50 |
| 623-10 | geared wheel & plain mag axle | 7.50 |
| 623-13 | geared wheel & knurled mag axle | 7.50 |
| 623-20 | FM mag axle bearing postwar style | 1.00 |
| 623-20M | non mag axle bearing MPC | 1.00 |
| 623-22 | worm wheel fits mag axle | 2.50 |
| 624-AD | C & O adhesive decal set repro | 3.50 |
| 624-8 | water decal C & O circle repro | 1.50 |
| 624-9 | water decal C & O lettering repro | 1.50 |
| 625-AD | adhesive decal LV diamond/625 *pr* | 3.50 |
| 625-182 | plastic dummy cplr 1/2 collar | 1.00 |
| 627-AD | adhesive decal LV diamond/627 *pr* | 2.50 |
| 627-52 | pilot AKA (8030-76) | 2.00 |
| 627-122 | pilot 2 step new Lionel | 1.50 |
| 628-AD | yellow NP adhesive decal set | 2.50 |
| 633-107 | nylon washer for brushplate | 0.30 |
| 646-13 | crosshead guide bracket only | 5.50 |
| 656-NB | adhesive number board nickle repro | 1.25 |
| 671-EDB | blue electronic adhes decals *pair* | 2.00 |
| 671-TH | corner grabrail front/rear orig | 0.90 |
| 671-EDBL | black electronic adhes decals *pair | 2.00 |
| 671-EDW | white electronic adhes decals *pair | 2.00 |
| 671-EDG | green electronic adhes decals *pair | 2.00 |
| 671-EDGR | gray electronic adhes decals *pair | 2.00 |
| 671-EDBR | brown electronic adhes decals *pair | 2.00 |
| 671-EDY | yellow electronic adhes decals *pai | 2.00 |
| 671-EDO | orange electron adhes decals *pair* | 2.00 |
| 671-EDGLO | light orange elect adhes decals *pr | 2.00 |
| 671-EDR | red electronic adhes decals *pair | 2.00 |
| 671-6 | handrail RH new Lionel | 1.25 |
| 671-7 | handrail LH new Lionel | 1.25 |
| 671-13 | clip for bottom of boiler front LIM | 2.10 |
| 671-20 | axle bushing | 0.75 |
| 671-21 | driver wheel axle swaged | 1.50 |
| 671-25 | driver wheel axle plain | 1.10 |
| 671-32 | rear apron (steps) | 2.75 |
| 671-33 | cup washer | 0.75 |
| 671-62 | orig smoke box cover assy LIMITED | 20.00 |
| 671-66 | smoke lamp only (14v) reproduction | 5.00 |
| 671-67 | lamp contact assy reproduction | 7.50 |
| 671-81 | rear truck rivet | 0.75 |
| 671-83 | flangeless wheels & axle assy LIM | 2.00 |
| 671-84 | flangeless wheel turbine trk LIMIT | 0.50 |
| 671-85 | axle retainer | 1.00 |
| 671-86 | 6-32 shoulder screw early 671,746 | 1.00 |
| 671-90 | e-unit for turbine LIMITED | 29.00 |
| 671-93 | front truck new Lionel | 10.00 |
| 671-94 | front truck "T" stud turbine | 1.00 |
| 671-96 | flapper arm assy orig LIMITED | 10.00 |
| 671-98 | side rod turbines 671,681,2020 | 2.00 |
| 671-99 | long shoulder screw w/grooved head | 0.75 |
| 671-101 | smoke cam 1946 laser repro | 4.00 |
| 671-102 | flapper arm spring reproduction | 1.00 |
| 671-105 | collector assy sub 681-4 | 8.00 |
| 671-106 | collector frame new LTI Limited | 1.50 |
| 671-107 | collector arm rivet | 0.20 |
| 671-108 | collector spring reproduction | 0.50 |
| 671-109 | collectr arm assy LIMITED | 4.00 |
| 671-111 | collector roller reproduction | 0.60 |
| 671-112 | insulating spacer | 0.25 |
| 671-115 | flapper screw long reproduction | 2.00 |
| 671-120 | flapper screw short LIMITED | 2.00 |
| 671-126 | wheel & axle assy | 1.50 |
| 671-127 | flanged pilot wheel reproduction | 0.50 |
| 671-140 | E-unit return spring | 0.20 |
| 671-151 | truck spring correct ID | 0.20 |
| 671-158 | nameplate w/lettering reproduction | 3.00 |
| 671-158R | insul plate repro no lettering | 1.75 |
| 671-160 | metal smoke cover | 4.00 |
| 671-160E | early metal smoke unit cover origin | 3.00 |
| 671-160U | smoke unit cover orig used | 2.50 |
| 671-167 | smoke unit piston | 2.75 |
| 671-168 | cylinder only for smoke housing | 2.00 |
| 671-170 | smoke unit assy orig w/liquid kit | 15.00 |
| 671-170H | smoke housing assy orig used LIMIT | 9.00 |
| 671-180 | brass worm gear reproduction | 3.00 |
| 671-181 | black smoke stack gasket repro | 0.40 |
| 671-181W | white smoke stack gasket repro | 0.40 |
| 671-182 | smoke cam new LTI | 1.50 |
| 671-183 | worm cover | 0.75 |
| 671-184 | drawbar for turbine | 2.75 |
| 671-185 | long shoulder screw or sub 675-23 | 0.60 |
| 671-186 | collector insulation reproduction | 1.50 |
| 671-188 | smoke lever bend up reproduction | 1.75 |
| 671-196 | original boiler front assy LIMITED | 16.00 |
| 671-196AD | b frnt adhesive decal(6200) | 0.60 |
| 671-196D | bfront keystone water decal (6200) | 1.00 |
| 671-200 | collector terminal | 2.00 |
| 671-201 | motor centering dowel pin | 0.25 |
| 671-202 | rear trk & drawbar assy | 15.00 |
| 671-209 | 4 finger contact assembly | 3.50 |
| 671-212 | smoke unit lining repro | 0.40 |
| 671-214 | black lockwasher #3 split ring | 0.20 |
| 671-220 | cloth wire & washer assy orig new | 0.75 |
| 671-221 | smoke unit lining | 0.40 |
| 671-223 | cord, washer & light contact | 0.75 |
| 671-225E | small early pill type smoke element | 7.00 |
| 671-225L | 7 piece liquid smoke kit | 4.00 |
| 671-225P | pill smoke element reproduction | 8.00 |
| 671-225W | nichrome wire per ft | 0.20 |
| 671-231 | smoke unit housing (bowl) | 2.50 |
| 671-236B | turbine wheel w/black tire orig | 7.50 |
| 671-238 | side rod screw w/grooved head | 0.75 |
| 671-239 | spacer for turbine wheel | 1.50 |
| 671-248 | axle bushing | 0.75 |
| 671-253 | axle AKA(671-25) | 1.25 |
| 671M-MFS | motor field stud w/nut | 2.50 |
| 671RM-2 | brushplate assy orig LIMITED | 12.50 |
| 671M-4 | field assembly new Lionel | 15.00 |
| 671M-5 | black brushplate original LIMITED | 10.00 |
| 671M-6 | motor field stud new LTI | 2.00 |
| 671M-19 | rear thrust washer .302 diam | 0.20 |
| 671M-20 | rear bearing brass reproduction | 1.50 |
| 671M-21 | ball bearing for motor | 0.20 |
| 671M-22 | truck retainer | 0.20 |
| 671M-23 | thin thrust/coupler washer | 0.20 |
| 675-8L | late steamchest w/pin orig Madison | 25.00 |
| 675-8LR | late steamchest w/pin reproduction | 24.00 |
| 675-9 | smoke unit assy orig w/liquid unit | 15.00 |
| 675-9H | smoke housing orig used LIMIT | 9.00 |
| 675-13 | smoke crank | 1.50 |
| 675-14 | "5690" boiler front assy repro | 12.50 |
| 675-14AD | "5690" keystone ADHESIVE decal | 0.60 |
| 675-14D | "5690" keystone WATER decal | 1.00 |
| 675-14ML | epoxy on marker lights *pair* repro | 2.50 |
| 675-14PA | partial boiler front assy | 5.50 |
| 675-15 | boiler front spring clip | 1.25 |
| 675-17 | black cloth wire/washer assy orig | 0.75 |
| 675-19 | pilot truck complete new Lionel | 6.00 |
| 675-22 | drawbar 675,2025,2035 | 2.75 |
| 675-23 | shoulder screw reproduction | 0.50 |
| 675-26 | smoke stack orig black early 675 | 2.00 |
| 675-26L | aluminum smoke stack late 675,2026 | 2.00 |
| 675-27 | handrail | 1.00 |
| 675-28 | rivet rear truck | 0.25 |
| 675-31 | ornamental bell | 1.25 |
| 675-32 | repro boiler front assy 5690 decal | 12.50 |
| 675-33 | smokestack cleaner original | 1.00 |
| 675-50 | armature original Madison | 20.00 |
| 675-52 | spoked trailer trk wheel new LTI | 0.60 |
| 675-151 | pilot truck spring | 0.25 |
| 675M-1 | motor complete original Madison | 65.00 |
| 681-4 | collector assy new Lionel | 8.00 |
| 681-6 | collector arm no roller | 1.75 |
| 681-11 | axle bushing oilite reproduction | 0.75 |
| 681-15 | loco pickup roller | 0.75 |
| 681-16 | roller pin | 0.50 |
| 681-19 | axle non magnetic | 1.25 |
| 681-22 | smoke lever bend down LIMIT | 2.00 |
| 681-23 | center wheel no flange original | 5.00 |
| 681-23W | center wheel w/white rim LIMIT | 3.50 |
| 681-24 | rear flanged wheel original new | 5.00 |
| 681-24W | end wheel w/white rim | 3.50 |
| 681-105 | brushplate AKA 8002-22 | 6.00 |
| 681-120 | rear motor bearing | 1.00 |
| 681-121 | thrust bearing | 1.75 |
| 682-5 | ecc valve gear assy | 5.00 |