| 8010-117 | pinion gear | 1.00 |
| 8010-118 | axle bearing | 0.75 |
| 8010-122 | plain wheel | 1.00 |
| 8010-125 | armature assy LIMITED | 20.00 |
| 8010-139 | brushplate LIMITED | 5.00 |
| 8010-165 | #4-40x1/4 phillips truss hd | 0.25 |
| 8010-180 | moulded coupler LIMITED | 2.00 |
| 8010-190 | worm axle | 0.50 |
| 8010-500 | brushplate new LTI LIMITED | 3.00 |
| 8020-NB | number board red LIMITED | 1.25 |
| 8020-15 | window shell for Alco | 1.50 |
| 8021-105 | pivot bearing | 0.50 |
| 8021-106 | motor truck less arm/brushplate | 29.00 |
| 8022-140 | brush plate assy LIMITED | 10.00 |
| 8030-6 | Illinois Central water decal | 0.50 |
| 8030-13 | lamp socket assy one wire | 1.50 |
| 8030-14 | lamp socket assy one wire | 1.50 |
| 8030-20&21 | handrail set 4 pc LH/RH repro | 5.00 |
| 8030-22 | truck stud | 0.75 |
| 8030-23 | cup washer | 0.50 |
| 8030-25 | RH handrail support repro | 1.25 |
| 8030-30 | LH handrail support repro | 1.25 |
| 8030-35 | truck frame fits 2328 collector trk | 2.00 |
| 8030-76 | pilot for dummy truck also 627-52 | 2.00 |
| 8030-118 | thrust bearing screw | 0.30 |
| 8030-120 | coupler hd assy (1615-54) | 2.50 |
| 8040-T50 | #4x7/16 phillips pan hd screw | 0.20 |
| 8040-5 | roller housing MPC LIMITED | 2.50 |
| 8040-7 | manual switch assy | 2.00 |
| 8040-11 | spoked rear wheel | 0.75 |
| 8040-12 | plastic crosshead RH LIMIT | 1.00 |
| 8040-13 | plastic crosshead LH | 1.00 |
| 8040-14 | bushing | 0.30 |
| 8040-15 | rear truck assy LIMIT | 5.00 |
| 8040-117 | idler gear | 1.50 |
| 8040-118 | cluster gear | 1.50 |
| 8040-120 | armature bearing plate LIMITED | 1.00 |
| 8040-123 | plain wheel LIMITED | 1.50 |
| 8040-124 | boss gear wheel LIMITED | 1.50 |
| 8040-128 | armature assy LIMITED | 13.50 |
| 8040-143 | wire brown 24 ga stranded/ft | 0.20 |
| 8040-144 | wire black 24 ga stranded/ft | 0.20 |
| 8040-145 | fiberglass black 1/8" sleeve/ft | 0.50 |
| 8040-146 | wire blue 24 ga stranded/ft | 0.20 |
| 8040-147 | wire green 24 ga stranded/ft | 0.20 |
| 8040-148 | wire yellow 24 ga stranded/ft | 0.20 |
| 8040-149 | wire red, 24 ga stranded/ft | 0.20 |
| 8040-150 | motor brush reproduction | 0.75 |
| 8040-151 | headlight lens | 0.50 |
| 8040-157 | brush spring new LTI Limited | 1.00 |
| 8040-171 | #6-32x1/4 round head slotted black | 0.20 |
| 8040-172 | #4-40x5/16 slotted pan head screw | 0.20 |
| 8040-172P | #4-40x5/16 phillips round hd | 0.20 |
| 8040-175 | sleeve, black, 3/16" dia. x 1" | 0.20 |
| 8049-318 | clear lamp 18v 55ma | 1.25 |
| 8054-NB | number boards *pair* reproduction | 3.00 |
| 8055-NB | number boards *pair* reproduction | 3.00 |
| 8059-030 | eyelet black LIMITED | 0.20 |
| 8060-015 | trailing truck assy Jr Hudson | 9.00 |
| 8060-165 | collector assy Jr Hudson | 5.50 |
| 8060-200 | smoke unit complete LIMITED | 11.00 |
| 8071-30 | eyelet black (SE-54) LIMITED | 0.20 |
| 8082-300 | lamp LIMITED | 1.00 |
| 8100-32 | valve hanger assy class J LIMITED | 12.50 |
| 8100-60 | smoke unit class J MPC LIMITED | 15.00 |
| 8100-81 | exhaust tube | 0.75 |
| 8100-90 | fuse w/leads LIMIT | 1.25 |
| 8100-570 | F3 silver frnt MAG mtr trk LIMITED | 58.00 |
| 8101-T22 | tender frame fits 2224T LIMIT | 5.00 |
| 8101-T35 | #3-48x3/16 round hd black phillips | 0.25 |
| 8101-T30 | flat washer 1/32 thick LIMITED | 0.20 |
| 8101-541 | lever & piston assy LIMITED | 7.60 |
| 8111-30 | clear lens diesel switcher | 0.75 |
| 8111-31 | red marker lens | 0.40 |
| 8140-9 | drive rod LIMIT | 1.00 |
| 8140-15 | drawbar | 1.00 |
| 8141-T10 | tender frame MPC LIMITED | 5.00 |
| 8141-20 | screw hex head | 0.40 |
| 8141-22 | 6x3/8 phillips pan head black screw | 0.20 |
| 8141-55 | smoke element liquid | 1.00 |
| 8141-55K | liquid smoke unit kit (7 pc) | 4.00 |
| 8141-56 | white fiberglass wick for 8141-55 | 0.20 |
| 8141-58 | spade lug & lead assy | 0.30 |
| 8141-59 | interconnecting female plug | 0.50 |
| 8141-62 | wire superflex stranded per ft | 0.25 |
| 8141-70 | 4-40x3/8 allen hd scr black | 0.25 |
| 8142-16 | ornamental bell unpainted | 0.50 |
| 8142-20 | front truck assy LIMITED | 7.50 |
| 8142-22 | front truck frame only LIMITED | 1.25 |
| 8142-24 | eyelet | 0.20 |
| 8142-25 | shoulder rivet LIMITED | 0.50 |
| 8142-26 | front truck bracket | 1.25 |
| 8142-30 | rear truck assembly LIMITED | 12.00 |
| 8142-32 | drawbar LIMITED | 1.00 |
| 8142-34 | shoulder rivet LIMITED | 0.50 |
| 8142-35 | shoulder rivet | 0.40 |
| 8142-38 | drive rod | 1.25 |
| 8142-40 | crosshead guide plate | 2.00 |
| 8142-41 | shouldered rod spacer | 0.50 |
| 8142-44 | side rod screw | 0.25 |
| 8142-45 | drive rod screw | 0.25 |
| 8142-46P | #6-32 x 5/16 philips pan hd | 0.20 |
| 8142-46S | #6-32 x 5/16 slotted pan hd | 0.20 |
| 8142-48 | crosshead drive screw | 0.40 |
| 8142-49 | #6-32 x 3/8 sunk oval hd | 0.25 |
| 8142-51 | screw 4-40x1/4RH phillips | 0.20 |
| 8142-52 | 6-32x5/16 round head slotted black | 0.25 |
| 8142-53 | front truck screw | 0.25 |
| 8142-60 | front truck spring | 0.50 |
| 8142-62 | 4-40x3/16 round head phillips LIM | 0.20 |
| 8142-63 | lockwasher #4 external tooth | 0.20 |
| 8142-65 | #6-32 x 7/16 sunk oval hd type | 0.25 |
| 8142-80 | front truck washer | 0.25 |
| 8142-85 | piston link & arm RH | 1.50 |
| 8142-86 | piston link & arm LH | 1.50 |
| 8142-95 | crosshead guide | 1.00 |
| 8142-500 | nut 6-32 for whistle mount | 0.20 |
| 8142-501 | drive linkage assy LIMITED | 3.25 |
| 8150-55 | GG-1 pilot truck-LIMITED | 27.50 |
| 8152-50 | horn circuit board LIMITED | 20.00 |
| 8152-80 | underframe w/grill LIMITED | 1.50 |
| 8152-536 | speaker 16 ohm for electronic horn | 5.00 |
| 8153-26 | air intake for Alco Cab | 1.00 |
| 8157-45 | underframe with grill LIMITED | 5.00 |
| 8161-125 | gear holder LIMITED | 1.50 |
| 8164-187 | B-unit frame upper LIMITED | 5.50 |
| 8204-T38 | baffle clip speed nut | 0.25 |
| 8205-T50 | screw #4x5/16 | 0.25 |
| 8205T-50 | #4 x 5/16 pan hd | 0.25 |
| 8206-30 | #4-40 x 3/8" fillister hd | 0.20 |
| 8206-41 | valve gear assy AKA (2055-30) | 6.50 |
| 8206-42 | smoke unit assy with SOS contact | 14.00 |
| 8206-45 | cast crosshead with finger | 0.75 |
| 8206-56 | rubber tire AKA(242-206) | 0.50 |
| 8206-82 | E unit 2 fingers w/shield | 3.50 |
| 8206-100 | motor assy-less e-unit MPC orig new | 39.00 |
| 8209-23 | side rod RH LIMIT | 2.00 |
| 8209-24 | side rod LH LIMIT | 2.00 |
| 8209-27 | aluminum shoulder spacer | 0.50 |
| 8209-119 | brushplate assy-no springs new LTI | 2.00 |
| 8209-119X | brush plate assy complete | 5.00 |
| 8209-120 | roller contact spring | 0.75 |
| 8209-128 | armature & pinion gear LIMITED | 12.00 |
| 8209-130 | collector bracket | 0.50 |
| 8209-150 | rivet | 0.25 |
| 8209-165 | pickup roller assy | 1.50 |
| 8210-13 | boiler front assy MPC gold LIMITED | 15.00 |
| 8214-51 | "E" Unit, Electronic new LTI | 22.00 |
| 8215-61 | SOS female 3 prong plug assembly | 2.50 |
| 8215-111 | cylinder & front piece LIMITED | 26.50 |
| 8240-10 | ornamental gold whistle | 0.40 |
| 8240-15 | gold bell LIMITED | 1.25 |
| 8240-20 | smoke stack top | 0.60 |
| 8240-25 | smoke stack bottom | 0.60 |
| 8240-30 | gold headlight box LIMITED | 0.75 |
| 8240-35 | headlight lens | 0.50 |
| 8240-40 | boiler front LIMIT | 1.25 |
| 8240-45 | motor bracket LIMITED | 1.00 |
| 8240-55 | drive rod | 2.35 |
| 8240-70 | #6-32x3/4 flat head screw black | 0.20 |
| 8240-74 | linkage docksider LH | 0.50 |
| 8240-75 | linkage docksider RH | 0.50 |
| 8240-76 | stack ring gold | 0.50 |
| 8250-6 | decal Santa Fe yellow & blue | 0.50 |
| 8250-35 | fiber washer | 0.20 |
| 8251-65 | diode | 1.00 |
| 8252-10 | marker lens red | 0.50 |
| 8260-NB | number boards *pair* reproduction | 3.00 |
| 8260-26 | bracket spacer LIMITED | 0.60 |
| 8260-30 | rivet .093x.25 LIMITED | 0.20 |
| 8262-NB | number boards *pair* reproduction | 3.00 |
| 8263-10 | Santa Fe adhesive decal | 0.75 |
| 8263-30 | mounting stud LIMITED | 0.60 |
| 8263-45 | ground strap LIMITED | 1.00 |
| 8263-71 | truck side & stud assy LIMITED | 5.00 |
| 8263-73 | pilot for GP | 1.75 |
| 8263-100 | motor truck frame | 4.00 |
| 8264-76 | plain end wheel new LTI | 2.50 |
| 8264-517 | armature MPC for motorized units | 17.50 |
| 8265-25 | SD 40 Front light lens | 0.90 |
| 8265-35 | SD-40 rear light lens | 1.00 |
| 8265-55 | rear light retainer SD40 LIMITED | 1.00 |
| 8265-75 | bell for SD40 | 1.25 |
| 8265-515 | pilot LIMITED | 2.00 |
| 8265-518 | foam pad 1x1 for circuit board | 0.30 |
| 8265-535 | spacer collector | 1.00 |
| 8265-545 | snow plow | 1.75 |
| 8265-545G | snow plow molded light gray | 1.50 |
| 8265-584 | SD40 black fuel tank MPC | 5.00 |
| 8265-752 | palnut LIMITED | 0.25 |
| 8268-30 | screws to hold 8008-105 mtr | 0.20 |
| 8268-60 | dummy coupler LIMITED | 2.00 |
| 8300-T20 | tender lantern black | 0.75 |
| 8300-20 | black smoke stack | 0.50 |
| 8300-25 | headlight lens clear | 0.50 |
| 8300-35 | drawbar LIMITED | 1.00 |
| 8300-36 | spacer LIMITED | 0.50 |
| 8300-45 | front truck assy new Lionel LIMITED | 4.00 |
| 8300-55 | main rod RH | 1.00 |
| 8300-56 | main rod LH | 1.00 |
| 8300-58 | side rod RH | 0.75 |
| 8300-59 | side rod LH | 0.75 |
| 8300-60 | valve linkage LIMIT | 0.50 |
| 8300-65 | side rod spacer .170 | 0.50 |
| 8302-16 | wire spring LIMITED | 0.50 |
| 8304-18 | red running light | 0.40 |
| 8304-165 | screw 4-40x1/4 phillips black LIMIT | 0.25 |
| 8306-55 | roller (semi scale hudson) | 1.25 |
| 8306-101 | motor hsing assy LIMITED | 23.60 |
| 8306-140 | male plug assy less wire | 3.50 |
| 8306-189 | retaining ring LIMITED | 0.20 |
| 8306-200 | hudson smoke unit complete LIMITED | 27.00 |
| 8306-207 | check ball retaining spring | 0.25 |
| 8306-213 | smoke piston & spring assy | 3.75 |
| 8306-214 | smoke manifold | 1.25 |
| 8306-530 | screw | 0.25 |
| 8306-533 | motor screw LIMITED | 1.20 |
| 8306-534 | allen hd screw 773,783,784,etc | 1.00 |
| 8306-536 | screw 4-40x3/8F phillips | 0.25 |
| 8306-538 | 6-32x1.125" black phillips hd screw | 0.60 |
| 8306-551 | LH crosshead & driverod assy | 12.00 |
| 8306-561 | RH crosshead & driverod assy | 12.00 |
| 8306-611 | flanged wheel assy LIMITED | 6.50 |
| 8306-621 | center wheel assy LIMITED | 6.00 |
| 8306-632 | screw 4-40x1/8 phillips | 0.25 |
| 8306-633 | screw 4-40x5/16 phillips LIMITED | 0.20 |
| 8306-635 | screw black oxide 4-40x7/8R | 0.20 |
| 8306-637 | 4x5/16 FHST phillips hd screw | 0.30 |
| 8307-16 | drive pin-painted yellow | 0.25 |
| 8307-18 | drive screw LIMITED | 0.20 |
| 8307-35 | lens LIMITED | 1.00 |
| 8307-53 | number board LIMITED | 2.50 |
| 8307-506 | steamchest class J new Lionel LIMI | 25.00 |
| 8310-8 | main side rod | 1.00 |
| 8310-9 | spacer bushing | 0.40 |
| 8310-10 | valve side rod | 0.75 |
| 8310-11 | valve stem | 0.50 |
| 8310-12 | valve linkage RH | 0.75 |
| 8310-15 | cowcatcher | 2.00 |
| 8310-20 | piston cover LIMITED | 2.00 |
| 8310-21 | piston housing LIMITED | 1.00 |
| 8310-22 | drawbar | 1.75 |
| 8310-24 | bracket | 1.25 |
| 8310-26 | flat hd screw 6-32 x 7/8 LIMITED | 0.25 |
| 8310-32 | valve side rod assy RH | 4.00 |
| 8350-12 | plain gear diesel wheel | 1.00 |
| 8352-18X | 18 volt lamp w/plastic wedge base | 0.75 |
| 8352-20 | short handrail RH-LIMITED | 1.25 |
| 8352-21 | short handrail LH | 1.25 |
| 8352-22 | RH cab handrail long SS LIMITED | 1.30 |
| 8352-23 | LH cab handrail long SS LIMITED | 1.30 |
| 8352-55 | windshield/marker light | 1.50 |
| 8352-311 | lamp & adaptor 14 volt assy LTI | 1.00 |
| 8352-320 | 2 wire lampsocket for 8352-300 | 1.00 |
| 8352-411 | red lamp & adaptor LIMITED | 1.25 |
| 8352-511 | green lamp & adaptor LIMITED | 1.25 |
| 8352-600 | red lamp & socket assy LIMITED | 1.75 |
| 8354-10 | lamp & one wire socket assy | 1.75 |
| 8355-202 | #6-32 hex nut LIMIT | 0.20 |
| 8360-56 | window GP 7/9, SD 9/24 | 1.50 |
| 8363-NB | number boards *pair* reproduction | 3.00 |
| 8363-6 | B & O nose water decal reproduction | 2.50 |
| 8364-NB | number boards *pair* reproduction | 3.00 |
| 8365-NB | number boards *pair* reproduction | 3.00 |
| 8366-NB | number boards *pair* reproduction | 3.00 |
| 8368-72 | light bracket LIMITED | 0.75 |
| 8370-NB | number boards *pair* reproduction | 3.00 |
| 8370-31 | F3 A Power Frame gray LIMITED | 24.00 |
| 8372-NB | number boards *pair* reproduction | 3.00 |
| 8376-521 | locater tab reproduction | 1.50 |
| 8376-546 | snowplow painted grey | 3.25 |
| 8377-559 | weight (60 gram) LIMITED | 0.75 |
| 8379-7 | firecar seat (yellow MPC) | 0.75 |
| 8379-20 | outrigger (yellow MPC) | 0.75 |
| 8379-27 | black fireman painted face/hands LI | 4.00 |
| 8379-40 | armature assy for firecar LIMITED | 20.00 |
| 8403-20 | front truck assy LIMITED | 9.00 |
| 8403-21 | front truck stud | 1.10 |
| 8403-22 | front truck spring | 0.30 |
| 8403-30 | drive rod new LTI LIMITED | 0.90 |
| 8403-32 | drive rod spacer LIMITED | 0.50 |
| 8404-T06 | lamp holder LIMITED | 1.00 |
| 8404-75 | insulation plate turbine frame | 1.75 |
| 8452-6 | Erie Nose decal orig MPC LIMITED | 3.50 |
| 8458-516 | dual mtr SD40 frame MPC LIMITED | 5.00 |
| 8459-2 | Rio Grande snowplow cab | 20.00 |
| 8459-16 | impeller & shaft assy LIMITED | 15.00 |
| 8459-526 | E-unit 3 pos w/rotary arm LIMITED | 29.00 |
| 8459-700 | "O" ring 3 inch diameter | 1.50 |
| 8464-NB | number boards *pair* reproduction | 3.00 |
| 8465-NB | number boards *pair* reproduction | 3.00 |
| 8466-NB | number boards *pair* reproduction | 3.00 |
| 8467-NB | number boards *pair* reproduction | 3.00 |
| 8477-6 | grab handle GP-9 new LTI | 0.40 |
| 8477-80 | underframe with grill LIMITED | 2.00 |
| 8477-85 | ckt brd mntg brkt LIMITED | 2.75 |
| 8477-178 | lamp bracket LIMITED | 1.25 |
| 8477-510 | black frame assembly LIMITED | 15.00 |
| 8480-NB | number boards *pair* reproduction | 3.00 |
| 8482-NB | number boards *pair* reproduction | 3.00 |
| 8482-570 | dummy front colectr trk w/pu-gray | 35.00 |
| 8490-25 | bumper trolley car | 1.25 |
| 8490-50 | side window RH trolley | 0.85 |
| 8490-51 | side window LH trolley | 0.85 |
| 8490-52 | end window trolley | 0.50 |
| 8500-30 | collector shoe | 0.75 |
| 8500-126 | black insert w/boss LIMITED | 0.50 |
| 8500-129 | gear wheel w/black boss insert | 1.60 |
| 8500-130 | plain wheel w/o boss LIMITED | 1.50 |
| 8500-131 | plain wheel w/black boss insert LIM | 1.50 |
| 8506-55 | screw 4x3/4 self tap phillips LIMIT | 0.20 |
| 8507-150 | motor brush shunted w/lead | 1.00 |
| 8512-1 | docksider body ATSF Blue/Silver | 12.50 |
| 8516-50 | smoke unit assy LIMITED | 15.00 |
| 8516-55 | smoke unit piston LIMITED | 1.50 |
| 8516-57 | piston return spring LIMITED | 0.60 |
| 8551-31 | #6-32 x 1/2 RH mach scr Black | 0.20 |
| 8552-105 | motor mount pivot bearing | 0.50 |
| 8552-106 | motor body w/trk sides LIMITED | 35.00 |
| 8555-NB | number boards *pair* reproduction | 3.00 |
| 8555-10 | Milwaukee Rd nose decal repro | 4.50 |
| 8555-30 | #4 x 3/8 slotted flat hd | 0.25 |
| 8557-NB | number boards *pair* reproduction | 3.00 |
| 8566-NB | number boards *pair* reproduction | 3.00 |
| 8567-NB | number boards *pair* reproduction | 3.00 |
| 8568-NB | number boards *pair* reproduction | 3.00 |
| 8571-25 | radiator cover red LIMITED | 3.00 |
| 8578-3 | ballast tamper body LIMITED | 12.00 |
| 8578-13 | drive belt for ballast tamper | 1.00 |
| 8578-32 | ornamental brake new Lionel LIMIT | 1.00 |
| 8585-90 | frame support | 0.60 |
| 8590-28 | smoke unit LIMITED | 19.50 |
| 8600-13 | silver boiler front casting-no trim | 8.00 |
| 8600-20 | smoke unit return spring LIMIT | 0.50 |
| 8600-42 | smoke unit assy class J LIMIT | 15.00 |
| 8600-46 | screw 6-32x3/4 oval head | 0.20 |
| 8600-47 | 6-32x3/8 slotted fillister hd | 0.20 |
| 8600-49 | 4-40x3/8 phillips fillister hd | 0.20 |
| 8600-51 | #6 32 x 3/8 slotted pan hd | 0.20 |
| 8600-52 | #4-40 x 3/16 pan hd | 0.20 |
| 8600-66 | crosshead | 1.25 |
| 8600-69 | armature assy LIMITED | 15.00 |
| 8600-118 | knurled wheel axle LIMITED | 3.90 |
| 8600-119 | compound gear LIMITED | 1.25 |
| 8600-124 | gear LIMITED | 1.25 |
| 8600-143 | gear 2nd intermediate | 1.00 |
| 8600-167 | thrust washer (.090) | 0.85 |
| 8601-20 | smoke stack LIMIT | 1.00 |
| 8601-21 | bell LIMITED | 0.50 |
| 8601-55 | plastic side rod | 0.75 |
| 8601-70 | side rod yoke | 1.00 |
| 8603-11 | plain center wheel MPC LIMITED | 4.00 |
| 8603-20 | plain end wheel MPC LIMITED | 4.00 |
| 8603-22 | geared cntr wheel MPC LIMITED | 4.00 |
| 8603-24 | drive gear wheel LIMITED | 4.00 |
| 8606-079 | trailer truck frame | 15.00 |
| 8606-112 | armature assy new LTI LIMITED | 25.00 |
| 8606-130 | commutator for new LTI armature | 3.75 |
| 8606-504 | hudson cow catcher, black | 15.00 |
| 8610-42 | smoke unit assy new LTI | 15.00 |
| 8610-60 | drawbar-LIMITED | 1.75 |
| 8610-155 | bracket assy LIMITED | 7.50 |
| 8610-581 | trailing truck assy LIMITED | 12.00 |
| 8610-582 | rivet .625 long black | 0.20 |
| 8610-583 | washer .125 ID .359 OD | 0.25 |
| 8616-055 | E-unit mounting bracket LIMITED | 1.50 |
| 8616-122 | gear undercut wheel w/boss insert | 1.60 |
| 8652-NB | number boards *pair* reproduction | 3.00 |
| 8652-70 | F3 dummy A collector trk silver | 35.00 |
| 8653-NB | number boards *pair* reproduction | 3.00 |
| 8659-25 | window LIMITED | 1.50 |
| 8659-335 | flat ground spring w/closed ends | 1.75 |
| 8701-T60 | plain arch bar truck LIMITED | 3.25 |
| 8701-T70 | operating archbar coupler truck | 4.50 |
| 8701-8 | plain axle LIMIT | 1.25 |
| 8701-23 | front truck complete new MPC LIMIT | 7.50 |
| 8701-29 | swaged axle LIMIT | 1.75 |
| 8701-30 | smokestack assy w/heater LIMITED | 17.50 |
| 8701-31 | collector bracket General | 1.00 |
| 8701-32 | collector assy new MPC | 4.00 |
| 8701-54 | sand dome painted gold LIMIT | 1.50 |
| 8701-65 | plain endwheel w/red insert LIMITED | 3.50 |
| 8701-74 | twin piston LIMITED | 2.50 |
| 8701-76 | twin piston assembly | 4.50 |
| 8701-84 | boiler front door General LIM | 1.75 |
| 8701-100 | general mtr dual wound field-LIMIT | 35.00 |
| 8701-104 | #6x1/2 pan hd screw black | 0.20 |
| 8701-113 | 3-48 hex hd shouldr scr nickel | 0.50 |
| 8701-117 | idler gear new Lionel LIMITED | 1.40 |
| 8701-121 | sleeving black 5/32 dia. | 0.40 |
| 8701-150 | lantern painted red | 2.00 |
| 8702-20 | end wheel Southern Crescent | 2.75 |
| 8702-21 | center wheel Southern Crescent | 2.50 |
| 8702-35 | crosshead RH w/pusher LIMIT | 0.75 |
| 8702-45 | RH crosshead MPC w/pusher LIMITED | 1.50 |
| 8702-132 | brushplate-LIMITED | 6.50 |
| 8702-165 | end wheel & axle assy LIMITED | 7.00 |